Table of Contents
Advertisement
Understanding the print server ports
Number
Part
1
USB port (to computer)
2
USB port (to printer)
3
Test button
4
Power cord connector
Understanding the print server indicator lights
Description
Connects your print server to a computer for initial configuration
and network setup. Use USB port 2 to connect your print server
to your printer.
Connects your print server to your printer.
To print a test page, press and release the test button once.
Note: Test pages are printed in ASCII. Your printer must support
ASCII printing to print a test page.
To reset the print server to the factory default settings:
1 Disconnect the power supply.
2 Reconnect the power supply while pressing the test button.
3 Continue holding the test button until only the power indicator
light is lit.
Connects the print server to the power supply.
Unpacking your print server
2
Advertisement
Table of Contents
