Table of Contents
Advertisement
11
Use the same cable to connect the print server to your printer. To make this connection, insert
the large end of the USB cable into the middle USB port on the back of the print server, and
then insert the small end of the USB cable into your printer.
12
Click Next to continue with the Setup Utility Wizard.
13
Write down the port or MAC address information displayed on the screen. This information
will be needed when installing your printer on the network.
14
Click Finish to close the N4050e Setup Utility Wizard.
15
Remove the Setup Utility CD from your computer, insert your printer drivers CD or printer
software CD, and proceed to
Installing your printer on the
Configuring your wireless print server
9
network.
Advertisement
Table of Contents
