Lexmark N4050e Install Manual

N4050e
About the setup process
1
Read all instructions before proceeding with setup.
Before your printer can be connected to your wireless network, the print server must first
be configured for use on the network by connecting it to your computer and running the
N4050e Setup Utility CD.
Once the print server is configured, you must disconnect the print server from your
computer and attach it to your printer. After your printer is connected, use the drivers or
printer software CD that came with your printer to install your printer on your wireless
network (this will require selecting the network path when running the CD).
Connect the print server to your computer USB port using the USB cable.
2
P/N 14T0109 E.C. 5D0006
© 2004 Lexmark International, Inc. All rights reserved.
*14T0109*
Safety Information
• Use only the power supply provided with this product or the manufacturer's authorized replacement power supply.
• Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
• Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION: Do not set up this product or make any electrical or cabling connections during a lightning storm.
Federal Communications Commission (FCC) Information
This device complies with Part 15 of the FCC rules. Refer to the User's Guide on the N4050e Setup Utility CD for more information.
www.lexmark.com
Note: Refer to the N4050e User's Guide on the Setup Utility CD for alternate setup
information when installing the print server with third party printers.
Before setting up your wireless print server, make sure your printer has been set up
correctly.
• The toner or print cartridges are installed.
• Paper is loaded.
• Your printer is plugged in and powered on.
• Your printer is ready to be installed.
For help setting up your printer, refer to your printer's documentation.
Insert the N4050e Setup Utility CD, install the software, and run the Wireless
3
Setup Wizard.