Advertisement

Ethos Landscape & Portrait

Remote Control

- Log, Pebble & Driftwood Effect
- Inset Live Fuel Effect Radiant Convector Fire
Installation and
Users Instructions
These instructions should be read by the
installer before installation and then should be
handed to the end user when the installation
is complete.
This is an official requirement and is the
responsibility of the fitter of this
appliance.
Having installed the appliance, the installer
should take the necessary steps to ensure
that the user fully understands how to operate
the appliance and is also made aware of the
fire's basic cleaning and maintenance
requirements.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ethos Portrait and is the answer not in the manual?

Questions and answers

Summarization of Contents

Installation Requirements
Class I Chimney Installation
Details requirements for Class I conventional brick or stone chimneys.
Class II Flue Installation
Details requirements for Class II insulated twin wall flues.
Flue Flow Test
Procedure to check flue effectiveness and ensure no leakage into other premises.
Ventilation Requirements
Specifies ventilation needs for the appliance installation, if any.
Spillage Test Procedure
Checks clearance of combustion products and flue draw into the flue.
Installation Procedure
Class One Unlined Chimney Installation
Steps for installing the appliance in a Class One unlined chimney.
Class One Flue with Flexible Liner Installation
Procedure for installing the appliance with a Class One flexible flue liner.
False Drywall Chimney Breast & Twin Wall Flue Installation
Steps for installing with a false drywall chimney breast and twin wall flue.
Slips Kit Installation
Instructions for installing decorative marble or stone slips around the fireplace opening.
Clip-on Surrounds Installation
Steps for installing the fire with clip-on surrounds for a decorative finish.
User Instructions
General Warnings
Important safety advice regarding hot surfaces, guards, and combustible materials.
Fire Control Operation
Details on operating the main fire control unit and its features.
Handset Operation
Instructions for using the remote handset, including starting, stopping, and flame adjustment.
Setting Time and Display
Guide for setting the clock, 12/24 hour display, day, hour, and temperature units.
Handset Paging and Advanced Settings
How to page the handset and access advanced menu options like backlight and contrast.
Snooze Mode Operation
Instructions for setting the snooze function to automatically turn off the fire.
Thermostatic Mode Operation
Details on setting and using the thermostat for automatic room temperature control.
Pairing Handset to Fire Control
Steps to re-pair the handset with the fire control if connection is lost.
Cleaning and Maintenance
Removing the Glass Door
Step-by-step guide to safely remove the appliance's glass door for cleaning.
Cleaning Ceramic Components and Fuel Bed
Instructions for cleaning ceramic parts, fuel bed, and burner assembly.

Table of Contents