Advertisement
Table of Contents
O
PERATOR'S
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A.
M
ANUAL
SNOW THROWER
MODELS
E600E, E610E
E640F, E660G
FORM NO
. 770-10002E.fm
(5/2001)
Advertisement
Table of Contents
Related Manuals for MTD E660G
Summarization of Contents
Important Safe Operation Practices
Training
Instructions for safe operation and understanding controls.
Preparation
Steps to take before starting operation.
Operation
Guidelines for safe machine usage during operation.
Assembling Your Snow Thrower
Unpacking
Procedures for removing the snow thrower from its packaging.
Loose Parts
Identification of parts packed separately for assembly.
Attaching the Handles
Step-by-step guide to attach the snow thrower handles.
Attaching the Chute Assembly
Instructions for assembling the snow discharge chute.
Attaching Control Cables
Connecting and adjusting control cables for operation.
Attaching Chute Directional Control
Installing the chute directional control mechanism.
Attaching Shift Rod
Installing and adjusting the transmission shift rod.
Lamp Wiring
Connecting electrical wiring for the snow thrower lamp.
Know Your Snow Thrower
Operating Controls
Overview and function of all snow thrower controls.
Shift Lever
Explanation of the gear shifting mechanism and speeds.
Auger Control
How to engage and disengage the auger mechanism.
Traction / Auger Control Lock
Functionality of the lock for auger and traction controls.
Chute Directional Control
How to adjust the direction of snow discharge.
Throttle Control
Adjusting engine speed for operation.
Chute Tilt Control
Adjusting the distance snow is thrown.
Ignition Key
Proper use and storage of the ignition key.
Fuel Shut-off Valve
Operation of the fuel shut-off valve.
Operating Your Snow Thrower
Before Starting
Essential checks and safety procedures before operation.
Gas And Oil Fill-up
Instructions for safely fueling the snow thrower.
Starting Engine
Step-by-step guide to start the engine using recoil or electric start.
Electric Starter
Specific instructions for using the electric start system.
Making Adjustments
Chute Assembly
Adjusting the snow discharge chute angle.
Skid Shoe
Adjusting the height of skid shoes for ground clearance.
Traction Control
Adjusting the drive system for proper operation.
Drive Wheels
Selecting drive mode for one or both wheels.
Maintaining Your Snow Thrower
Lubrication
Guide to lubricating moving parts and bearings.
Wheels
Lubricating wheel bearings and axles.
Gear Case
Information on greasing the gear case.
Engine
Maintenance procedures for the engine.
Auger Shaft
Lubricating the auger shaft and bearings.
Service
Augers
Troubleshooting auger issues and shear bolts.
Shave Plate and Skid Shoes
Maintenance and replacement of shave plate and skid shoes.
Belt Replacement
Instructions for replacing drive and auger belts.
Changing Friction Wheel Rubber
Replacing the rubber on the friction wheel.
Off-Season Storage
Storage Preparation
Steps to prepare the snow thrower for long-term storage.
Trouble Shooting Guide
Engine Fails to Start
Common causes and solutions for engine starting problems.
Engine Runs Erratic
Diagnosing and fixing irregular engine operation.
Loss of Power
Troubleshooting reasons for reduced engine power.
Engine Overheats
Identifying and resolving engine overheating issues.
Excessive Vibration
Causes and solutions for excessive machine vibration.
Unit Fails to Propel Itself
Diagnosing and fixing propulsion problems.
Unit Fails to Discharge Snow
Troubleshooting snow discharge blockages or issues.
Manufacturer's Limited Warranty
Obtaining Service
How to get warranty service and locate dealers.
Warranty Exclusions
Conditions not covered by the limited warranty.
Implied Warranty Limitations
Information on implied warranties and their duration.
State Law Relation
How state laws affect warranty rights.
Need help?
Do you have a question about the E660G and is the answer not in the manual?
Questions and answers