Table of Contents
Advertisement
The bootup script displays operating system software initialization (code download and POST
verification) and basic configuration as shown in the following sample bootup display:
WLCNG Boot Loader Version 0.14.0 (Built on Dec 22 2008 at 11:54:51 by cisco)
Board Revision 1.2 (SN: FCW1303L04E, Type: AIR-CT5508-K9) (G)
Verifying boot loader integrity... OK.
. . .
IDE device 0:
- Model: VI DFC1024MB Firm: 20071116 Ser#: DFC1GB
- Type: Removable Hard Disk
- Capacity: 967.6 MB = 0.9 GB (1981728 x 512)
Press <ESC> now to access the Boot Menu...
If desired, press Esc to display the Bootloader Boot Options menu.
Step 4
Boot Options
Please choose an option from below:
1. Run primary image
2. Run backup image
3. Change active boot image
4. Clear Configuration
5. Format FLASH Drive
6. Manually update images
Please enter your choice:
Note
The rest of the process takes two to three minutes. Do not reboot the controller until the user login
Step 5
prompt appears.
Detecting Hardware . . .
Cryptographic library self-test....passed!
. . .
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 6.0.100.1
Initializing OS Services: ok
. . .
Starting SSHPM LSC PROV LIST: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: ok
License Agent: ok
78-18998-01
Enter 1 to run the current software, enter 2 to run the previous software, or enter 4 to run the
current software and set the controller configuration to factory defaults. Do not choose the other
options unless directed to do so.
Only options 1 through 3 are available in FIPS mode.
Unpacking and Installing the Controller
00000E52
Cisco 5500 Series Wireless Controller Installation Guide
23
Hide quick links:
Advertisement
Table of Contents
