Cisco WS-C5008B - Power Supply - 1100 Watt Installation Manual page 15

If the distance between the front rack rails and rear rack rails is between 21.5 inches and 32 inches,
•
use the long slide-mount brackets with the tabs facing the rear of the controller (see
Figure 9
RP SP
USB0 USB1 CONSOL
EN
RP SP
USB0 USB1 CONSOL
EN
Install the proper slide-mount brackets into the rear bracket adapters on the controller.
Step 5
Secure the slide brackets to the corresponding holes in the rear rack rail using four 12-24 or four 10-32
Step 6
screws, depending on the rack rail thread type (see
Figure 10
78-18998-01
Long Slide-Mount Brackets with Tabs Facing Rear of the Controller
Cisc o 550
0 Ser ies
Wir eles
s Con trol
ler
E
EN
1 2
3 4
5 6 Mod el 5508
7 8
PS1 PS2
SYS ACT
Cisc o 550
0 Ser ies
Wir eles
s Con trol
ler
E
EN
1 2
3 4 Mod el 5508
5 6
7 8
PS1 PS2
SYS ACT
Installing the Controller in the Rack (Rear)
Unpacking and Installing the Controller
Figure 10).
Cisco 5500 Series Wireless Controller Installation Guide
Figure 9).
15