Fan Cover - Honeywell HW5500 - 5500 Portable Generator Service Manual

FAN COVER

9.10 FAN COVER
A—COOLING FAN
Install by aligning the three lugs on the rear
side of the fan with the small hole in the fly-
wheel. When disassembling and assem-
bling, take care not to damage the fan
blades.
A
B
C
D
E
B—STARTER PULLEY
Install by aligning the hole in the pulley with
the lug on the cooling fan.
C—FLANGE NUT
Hold the flywheel by placing a screwdriver
into the pulley.
105 N•m (77 lb. ft.)
D—FAN COVER
Remove and install with the recoil starter
assembly.
E—RECOIL STARTER ASSEMBLY
Install with the recoil starter handle position
as shown.
9-10 www.honeywellgenerators.com Honeywell Portable Electrical Generator Service Manual