Table of Contents
Advertisement
FAN COVER
9.10 FAN COVER
A—COOLING FAN
Install by aligning the three lugs on the rear
side of the fan with the small hole in the fly-
wheel. When disassembling and assem-
bling, take care not to damage the fan
blades.
A
B
C
D
E
B—STARTER PULLEY
Install by aligning the hole in the pulley with
the lug on the cooling fan.
C—FLANGE NUT
Hold the flywheel by placing a screwdriver
into the pulley.
105 N•m (77 lb. ft.)
D—FAN COVER
Remove and install with the recoil starter
assembly.
E—RECOIL STARTER ASSEMBLY
Install with the recoil starter handle position
as shown.
9-10
www.honeywellgenerators.com
Honeywell Portable Electrical Generator Service Manual
Downloaded from
www.Manualslib.com
manuals search engine
Hide quick links:
Advertisement
Table of Contents
