Engine And Alternator - Honeywell HW5500 - 5500 Portable Generator Service Manual

ENGINE AND ALTERNATOR

9.2 ENGINE AND ALTERNATOR
A—END COVER
F
4 N•m (3 lb. ft.)
E
B—ROTOR BOLT
Use oil before replacing the rotor bolt.
D
C
A
B
I
C—ALTERNATOR HOUSING BOLTS
48 N•m (35 lb. ft.)
D—REAR BEARING CARRIER
H
AND STATOR
See CARBURETOR, page 9-7.
E—ROTOR
See ROTOR, page 9-5.
F—ENGINE
Contact an authorized service dealer
for engine maintenance and repairs.
G
Cylinder Head Bolts - 48 N•m (35 lb. ft.)
G—VIBRATION ISOLATORS
Insert tabs into holes.
Check rubber is not chipped,
hardened, or worn.
Refer to illustration for proper
positioning.
NOTE: On some models there are only
4 vibration isolators instead of 6.
H—FRAME
See WHEEL, LEG, & HANDLE
ASSEMBLY, page 9-11.
I— CRANKCASE COVER
28 N•m (21 lb. ft.)
9-2 www.honeywellgenerators.com Honeywell Portable Electrical Generator Service Manual