Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Yongnuo E-TTL
Summarization of Contents
Preparation Before Use
Installing the Batteries
Instructions for inserting AA batteries into the product, including precautions.
Installing the Transceiver on the Camera
Guide for mounting the transceiver onto the camera's hot shoe.
Installing Flash as Receiver
Steps to attach a flash unit onto the transceiver when used as a receiver.
Setting
Power Switch Operation
Details on how to turn the device on and off using the power switch.
Channel Setting
Procedure for selecting the operating channel using the CH SET button.
Receiving Group Setting
How to set the receiving group (A/B/C) using the GP SET button.
Flash Test Group Setting
Guide to setting up flash test groups using Test and GP SET buttons.
Shutter Sync
1st Curtain Sync
Explanation of the normal flash synchronization timing.
2nd Curtain Sync
Details on flash firing just before shutter closure.
High-Speed Sync (HSS/FP)
Information on synchronizing flash with high shutter speeds up to 1/8000s.
Flash Exposure Bracketing/Compensation
Flash Exposure Bracketing (FEB)
How to set Flash Exposure Bracketing in 1/3-stop increments.
Flash Exposure Compensation (FEC)
Instructions for setting Flash Exposure Compensation in 1/3-stop increments.
Zoom (Flash Coverage)
Automatic Zoom Setting
Details on how the flash zoom automatically adjusts with lens focal length.
Manual Zoom Setting
How to manually set the flash focal length between 24-105mm.
Zoom Lock Function
Enabling zoom lock to set flash zoom independently of the camera.
Manual and Multi Flash Modes
Manual Flash Mode
Setting manual flash output power from 1/128 to 1/1.
Multi Flash (Stroboscopic)
Configuring the stroboscopic flash mode with frequency and count.
Wireless Function
Wireless Channel Setting
Setting the transmitter channel (CH1-CH4) via the wireless function menu.
Wireless Firing Group Setting
Setting the firing group (All, A:B, A:B:C) via wireless function.
Flash Ratio with E-TTL II
All Groups (A+B+C) Ratio
Setting flash output ratio for all groups (A, B, C) with FEC.
Group A:B Ratio
Setting flash output ratio for groups A and B, Group C inactive.
Group A:BC Ratio
Setting flash output ratio for A and B, FEC for C.
Manual/Multi Flash Output by Group
All Groups (A+B+C) Output
Setting the same flash output for all groups (A, B, C) in Manual/Multi mode.
Group A:B Output
Setting flash output separately for groups A and B; Group C inactive.
Group A:B:C Output
Setting flash output separately for groups A, B, and C.
Flash Triggering for B/C Type Cameras
Type B Camera Operation
Instructions for using Type B cameras, including mix control mode.
Type C Camera Manual Output
Manually setting flash output for Type C cameras via control panel.
References
AF Assist Beam Emitter
How the AF assist beam emitter functions for autofocus in low light.
AF Assist Beam Feedback
Understanding the feedback mechanism of the AF assist beam emitter.
Applications Overview
Examples of product usage, like 2 Transceiver Kits and Multiple Transceivers.
Factory Reset Procedure
Steps to reset the transceivers to their factory default settings.
Maximum Sync Speed Information
Details on the maximum sync speed capabilities and limitations.
Automatic Saving Function
Explanation of which settings are automatically saved by the transceiver.
Troubleshooting
Power On/Shutdown Issues
Resolving problems with the device failing to power on or shutting down unexpectedly.
Flash Not Firing
Troubleshooting steps when the flash unit does not fire.
2nd Curtain Sync Issues
Resolving issues with enabling the 2nd curtain sync feature.
External Flash Menu Access Problems
Troubleshooting abnormal display or access to the external flash function menu.
AF Assist Beam Emitter Not Working
Diagnosing why the AF assist beam emitter is not functioning.
On-Top Flash Not Firing
Troubleshooting the on-top flash not firing when enabled as master flash.
Flash Zoom Setting Issues
Resolving problems setting flash zoom via the camera menu.
Channel Setting (5, 6, 7) via Camera Menu
Troubleshooting setting channels 5, 6, 7 through the camera menu.
ETTL Exposure Issues
Addressing underexposure or overexposure when using ETTL flash mode.
Display Information Missing on Flash
Troubleshooting missing aperture and distance info on the flash screen.
FEB Calculation Not Effective on Receiver
Resolving issues where FEB calculation does not affect the receiver.
Need help?
Do you have a question about the E-TTL and is the answer not in the manual?
Questions and answers