Table of Contents
Advertisement
CJ-500
CJ-400
USER'S MANUAL
* This User'sManual is intended for CJ-500 and CJ-400.
Thank you very much for purchasing the CJ-500/400.
•
To ensure correct and safe usage with a full understanding of this
product's performance, please be sure to read through this manual
completely and store it in a safe location.
•
Unauthorized copying or transferral, in whole or in part, of this manual
is prohibited.
•
The contents of this operation manual and the specifications of this
product are subject to change without notice.
•
The operation manual and the product have been prepared and tested as
much as possible. If you find any misprint or error, please inform us.
•
Roland DG Corp. assumes no responsibility for any direct or indirect
loss or damage which may occur through use of this product, regardless
of any failure to perform on the part of this product.
•
Roland DG Corp. assumes no responsibility for any direct or indirect
loss or damage which may occur with respect to any article made using
this product.
Advertisement
Table of Contents
Related Manuals for Roland CammJet CJ-400
Summarization of Contents
Federal Communications Commission (FCC) Radio Frequency Interference Statement
Grounding Instructions
Instructions for proper electrical grounding to prevent hazards.
Operating Instructions
Guidelines for safe and efficient use of the equipment.
Canadian Interference Regulations
Class A Notice
Compliance statement for Class A digital apparatus in Canada.
Classe A Avis (French)
French compliance statement for Class A digital apparatus in Canada.
To Ensure Safe Use
WARNING and CAUTION Notices
Explains the meaning and use of WARNING and CAUTION symbols.
About Safety Symbols
Describes the meaning of universal safety symbols used in the manual.
About Unit Labels
Ink Cartridge Label
Details the labels found on the ink cartridges.
What to Do Upon Opening the Carton
Checking Accessories
Verifies all shipped items are present after unpacking the carton.
Setting Up and Connection
Guides on initial setup and connecting the unit to a computer.
Attaching the Drain Bottle
Instructions on how to connect the drain bottle to the unit.
Disposal of Discharged Ink
Steps for safely disposing of used ink from the drain bottle.
Installing Ink Cartridges
Procedure for inserting new ink cartridges into the machine.
Powerup
Steps to turn on the unit for the first time and initial setup.
Part Names
Front View
Identifies components visible on the front of the machine.
Rear View
Identifies components located on the rear of the machine.
Inside the Front Cover
Identifies internal components accessible from the front cover.
Operation Panel
Details the buttons and display on the control panel.
Setup for Printing
Loading the Material
Guide on how to load roll material for printing.
Loading Flat Material
Guide on how to load flat sheet material for printing.
Test Printing
Procedure to perform a test print to check head status.
Setting the Printing Mode and Direction
How to configure print quality and direction settings.
Setup for Cutting
Loading the Material
Guide on how to load roll material for cutting.
Installing a Blade
Instructions for installing a cutting blade into the holder.
Loading Flat Material
Guide on how to load flat sheet material for cutting.
Setup for Printing and Cutting
Loading the Material
Instructions for loading material for combined print/cut jobs.
Installing a Blade
Instructions for installing a blade for cutting operations.
Test Printing
Performing a test print to verify quality.
Setting the Printing Mode and Direction
Configuring print quality and direction.
Test Cutting
Performing a test cut to adjust cutting conditions.
Downloading Printing/Cutting Data
Stopping Printing or Cutting Operations
Steps to halt active printing or cutting jobs.
Pausing Printing or Cutting Operations
How to temporarily pause and resume printing/cutting.
Maintenance
Replacing the Ink Cartridges
Step-by-step guide for replacing used ink cartridges.
Checking Ink Levels
How to check the remaining ink in the cartridges.
Cleaning the Printing Heads
Procedure for cleaning the print heads to resolve quality issues.
Changing the Type of Ink
Instructions for switching between different ink types.
Replacing the Cutter Blade
Guide on how to replace the cutting blade.
Replacing the Separating Knife
Steps for replacing the knife used for separating material.
When the Product Needs Cleaning
Information on cleaning various parts of the machine.
When Not in Use for a Prolonged Period
Recommended steps when the unit is stored for extended durations.
When Moving the Unit
Procedures to follow before and during unit relocation.
User's Reference
Environment Matching
How to perform automatic adjustment for environmental changes.
Performing Cutting or Printing at Desired Location
Setting a specific start point for print or cut operations.
Adjusting Printing and Cutting Positions
Aligning print and cut positions for accuracy.
Adjusting Automatically
Using automatic methods to adjust print/cut positions.
Adjusting Manually
Using manual methods to adjust print/cut positions.
Reloading Material for Cutting
Procedure for reloading material after initial processing for cutting.
Adjusting Crop Marks Automatically
Automatic detection and alignment using crop marks.
Reloading Material with Crop Marks
Reloading material while considering crop mark placement.
Adjusting Crop Marks Manually
Manual adjustment of positions based on crop marks.
Using Crop Marks Properly
Guidelines for effective use of crop marks.
Bidirectional Correction
Adjusting for slippage during bidirectional printing.
Aligning Printing and Cutting Length
Adjusting cutting length relative to printing length.
Performing Overprinting
Printing the same image multiple times for darker results.
Setting Page Margins
Defining margins between printed pages.
Prefeed ([PREFEED]) Function
Function to check material availability before printing/cutting.
Performing Long Printing/Cutting
Procedure for printing or cutting long materials.
Adjusting Printing Head Height
Adjusting the print head height for thick or warping materials.
Materials
Conditions for Usable Materials
Specifications for materials compatible with the unit.
Description of Keys
Description of Menu Items
Explains the functions of various menu options.
Display Menus Flowchart
Visual representation of menu navigation.
Making Corrections for Printing
Feed Correction
Correcting errors in material feed for improved print accuracy.
What to Do If...
CJ-500/400 Does Not Run
Troubleshooting steps when the machine fails to operate.
Sheet Too Short Message
Resolving issues when data exceeds material size.
Cannot Print Crop Marks Message
Troubleshooting when crop marks cannot be printed.
Poor Print Quality
Diagnosing and fixing issues causing low print quality.
Printing Exceeds Loaded Material
Addressing print jobs that extend beyond loaded material.
Material Not Cut Properly
Troubleshooting issues with material cutting accuracy.
Material Feed Issues
Resolving problems related to material feeding and slippage.
Material Jammed
Steps to take when the material gets jammed in the machine.
Misaligned Printed Lines
Correcting issues with misaligned print lines.
Material Cannot Be Separated
Troubleshooting when material separation fails.
Printing/Cutting Positions Misaligned
Fixing misalignments in print/cut positioning.
Base/Align Point Setting Issues
Resolving problems with base and align point settings.
Specifications
Interface Specifications
Technical details of the unit's interface connections.
Parallel Connector
Pinout and specifications for the parallel port connection.
Need help?
Do you have a question about the CammJet CJ-400 and is the answer not in the manual?
Questions and answers