Advertisement
Table of Contents
www.tapis.pl
INSTALLATION INSTRUCTIONS AND INSTRUCTIONS FOR USE
Gas fi res with closed combustion system
Original Bell-series - Retro Bell-series
Horizon Bell Medium / Small-series - Corner Bell Small L/R
Vertical Bell-series - View Bell-series
Bellfi res wishes you many cosy evenings with your new Bellfi res gas fi re
This document is an essential part of your gas fi re.
Read it carefully before installation and use of the
gas fi re and keep it in a safe place!
Advertisement
Table of Contents
Related Manuals for Bellfires View Bell Vertical
Summarization of Contents
Installation and Operation Instructions
Gas Fires with Closed Combustion System
Details the type of gas fires covered by the manual.
Bellfires Gas Fires Series Overview
Original Bell Series Models
Lists models within the Original Bell series.
Retro Bell Series Models
Lists models within the Retro Bell series.
Horizon Bell Series Models
Lists models within the Horizon Bell series.
Corner Bell Series Models
Lists models within the Corner Bell series.
Vertical Bell Series Models
Lists models within the Vertical Bell series.
View Bell Series Models
Lists models within the View Bell series.
Warranty Terms and Conditions
Bellfires Gas Fire Warranty Details
Explains the warranty coverage, duration, and exclusions.
Instructions for Use Introduction
Built-in Appliance Protection
Describes the appliance's safety features like thermo-electric pilot light shut off.
Essential Safety Precautions
Lists crucial safety precautions for operating the gas fire.
General Gas Fire Operation
Initial Chimney Warming Procedure
Advises on the initial 10-minute operation at maximum for chimney warming.
Hand Control Operation
Explains how to operate the burner using the control knob.
Igniting and Extinguishing the Fire
Critical Ignition Safety Notes
Crucial notes on pilot flame going out and main burner ignition.
Turning Off the Fire
Steps to turn off the main burner while keeping the pilot light on.
Extinguishing the Pilot Light
Procedure to turn off the pilot light.
Remote Control System
Remote Control General Information
Introduces the remote control system, transmitter, and receiver.
Hand-held Transmitter Details
Describes the function and configuration of the hand-held transmitter.
Remote Control Setup and Settings
Display and Time Setting
Instructions on how to set the current time on the display.
Signal Code Pairing Procedure
Guide for pairing the transmitter and receiver for the first time.
Remote Control Operating Modes
Understanding Operating Possibilities
Explains the three modes of operation for the remote control.
Remote Control Functions
Day Temperature Thermostat Operation
Describes automatic temperature regulation for daytime settings.
Night Temperature Thermostat Operation
Describes automatic temperature regulation for nighttime settings.
Timer Operation Explained
Explains how the appliance operates based on pre-set heating periods.
Advanced Remote Control Settings
Setting Desired Temperature
Instructions for setting the desired temperature using the remote.
Timer Programming (P1 & P2)
Instructions for programming the heating periods.
Remote Control Fire Ignition
Details the process of igniting the fire using the remote control.
Gas Regulating Block Operation
Common Error Message Interpretation
Lists common error messages and their potential causes.
Adjusting Flame Height
How to adjust flame height and turn off the main burner.
Appliance Shut-off and Faults
Appliance Shut-off Procedure
Steps to turn off the appliance completely, including the pilot light.
Troubleshooting Common Faults
Common issues and their potential reasons for the gas fire going out.
Battery Replacement Guide
Instructions for replacing batteries in the transmitter and receiver.
Manual Operation Mode
Emergency Manual Operation
How to operate the appliance manually in case of emergency.
Manual Fire Operation
Manual Ignition Safety Precautions
Notes on pilot flame going out and main burner ignition.
Manual Fire Extinguishing
Procedure to turn off the main burner.
Manual Appliance Shut-down
Steps to turn off the appliance and pilot light.
First-Time Appliance Use
Daily Maintenance Recommendations
General cleaning and maintenance advice for daily upkeep.
Critical Installation Safety Warning
Critical safety note regarding installation by a qualified engineer.
Installation Instructions General
General Installation Guidelines
General guidelines for installation by a certified engineer.
Pre-Installation Checks
Checks to perform before installation regarding gas type and pressure.
Flue System Requirements
Installation Preparation Steps
Steps to prepare before installing the gas fire.
Flue Outlet Positioning
Guidance on correctly positioning the flue outlet.
Wall-Mounted Flue Outlet Positioning
Minimum Distances for Wall Outlets
Specifies minimum distances for wall-mounted outlets from building features.
Positioning Flue Outlets Safely
Outlet Distance Regulations
Defines distance requirements for outlets relative to openings and air supplies.
Wall-Mounted Outlet Placement Guidelines
Avoiding Adverse Effects from Outlets
Lists minimum distances for wall-mounted outlets to prevent adverse effects.
General Services and Flue Systems
Fume Channel & Air Intake System
Details the requirements for the fume channel and combustion air intake system.
High Temperature Flue System Safety
Safety notes regarding high temperatures and flammable materials near the flue.
Rigid Concentric Flue System Connections
Horizontal Wall Termination Diagram
Illustrates and specifies dimensions for horizontal wall termination.
Vertical Roof-Mounted Outlet
Termination Length Inclusion
Clarifies that all dimensions cover the termination length.
Vertical Roof Outlet with Bend
Bend Ratio Requirements
Defines the vertical to horizontal ratio for bends.
Flexible Flue System Connections
Existing Lined Chimney Connection
Shows connection for vertical chimney outlets with existing lined chimneys.
Vertical Chimney Outlet with Bend >45°
Bend Ratio for Unlined Chimneys
Specifies ratio requirements for vertical/horizontal runs with bends over 45°.
Vertical Chimney Outlet without Liners
Termination Length Included
States that all dimensions cover the termination length.
Vertical Chimney with Bend & Unlined
Ratio for Unlined Chimneys with Bends
Defines the vertical to horizontal ratio for unlined chimneys with bends.
Flue System Component Descriptions
Barbas Concentric Flue System Components
Lists available components for the Barbas concentric flue system.
Flue System Component Notes
Bellfires Adapter for Barbas Systems
Notes about a supplied Bellfires adapter for Barbas systems.
Gas Connection and Appliance Positioning
Operating Unit Specifications
Describes the location and setup of the operating unit.
Convection Package Connections
Details connections for the optional convection package.
Appliance Placement Guidelines
Instructions on where and how to position the appliance.
Installation Material Safety
Prohibition of Combustible Materials
Warning against using combustible materials during installation.
Appliance Insulation Guidelines
Warning against insulating the appliance itself, only specific parts.
Fireplace Ventilation and Mounting
Convection Package & Ventilation Use
Illustrates the use of convection package and fireplace ventilation.
View Bell Vertical Mounting
Specific mounting instructions for the View Bell Vertical model.
Gas Connection Procedures
Gas Connection Safety Warning
Caution about not twisting the gas regulating block during connection.
Copper Pipe Cleaning Instruction
Critical instruction to clean copper pipes before connecting.
Remote Control Gas Block Diagram
Gas Regulating Block Identification
Identification of the gas regulating block component.
Remote Control Gas Block Piping
Piping for Remote Control Gas Block
Visual guide for piping a remote control gas regulating block.
Gas Regulating Block Types
Hand Control Gas Regulating Block
Details on the gas regulating block for hand control operation.
Appliance Build-in and Flue Connection
Concentric Flue System Connection
Instructions for connecting the concentric flue system.
Appliance Building-in Process
Steps for building the appliance into its enclosure.
Final Checks and Log Placement
Gas Connection Leak Check
Procedure to check gas connections for leaks after installation.
Ceramic Log/Pebble Placement Guide
Guidance on placing ceramic logs or marble pebbles.
Ceramic Log Set Installation
Important Log Placement Notes
Important notes regarding the placement of embers and logs.
Log Set Placement Groups
Log Placement for Group B
Log set placement instructions for Retro Bell Intermediate and Flat Bell.
Log Placement for Group C
Log set placement instructions for Derby and Horizon Bell Small.
Log Set Placement for Topsham Tunnel
Log Set Placement for Group E
Log placement instructions for Horizon Bell Small Tunnel.
Log Set Placement for Jersey
Jersey Natural Gas Log Placement
Log set placement instructions for Jersey (Natural Gas).
Jersey Propane Log Placement
Log placement instructions for Jersey (Propane).
Log Set Placement for Vertical Bell Small
Vertical Bell Small Natural Gas Placement
Log set placement instructions for Vertical Bell Small: Natural Gas.
Pilot Light Safety Warning
Critical note on ember placement relative to the pilot light.
Log Set Placement for Vertical Bell Small Propane
Vertical Bell Small Propane Placement
Log set placement instructions for Vertical Bell Small: Propane.
Burner Orifice Clearance
Instruction to maintain clear burner openings.
Log Set Placement for Vertical Bell Large Tunnel
Vertical Bell Large Tunnel Placement
Log set placement for Vertical Bell Large Tunnel.
Pilot Light Safety Advisory
Warning against placing embers near the pilot light.
Log Set Placement for Horizon Bell Medium Natural Gas
Horizon Bell Medium Natural Gas Placement
Log set placement instructions for Horizon Bell Medium: Natural Gas.
Pilot Light Safety Warning
Critical note on ember placement relative to the pilot light.
Log Set Placement for Horizon Bell Medium Propane
Horizon Bell Medium Propane Placement
Log set placement instructions for Horizon Bell Medium: Propane.
Burner Orifice Clearance
Instruction to ensure burner openings are clear.
Log Set Placement for View Bell Vertical Natural Gas
View Bell Vertical Natural Gas Placement
Log set placement for View Bell Vertical: Natural gas.
Pilot Light Safety Warning
Critical note on ember placement relative to the pilot light.
Log Set Placement for View Bell Vertical Propane
View Bell Vertical Propane Placement
Log set placement for View Bell Vertical: Propane.
Burner Orifice Clearance
Instruction to maintain clear burner orifices.
Marble Pebble Placement
Important Pebble Placement
Crucial instruction for placing marble pebbles for pilot light access.
Flue Gas Restriction Plate
Mounting the Flue Gas Restriction Plate
Guidance on fitting the flue gas restriction plate.
Post-Installation Checks
Checking Appliance After Installation
Final checks after installation, including flame appearance.
Maintenance Procedures
Annual Maintenance Requirements
Procedures for annual cleaning and inspection by a specialist.
Troubleshooting Gas Fire Issues
Common Reasons for Fire Extinguishing
Lists common issues that can cause the gas fire to extinguish.
Electrical Diagrams
Remote Control Model Diagram
Electrical diagram for models equipped with remote control.
Appliance Dimensions Overview
Derby and Derby II Dimensions
Technical dimensions for the Derby and Derby II models.
Flat Bell and Topsham Dimensions
Flat Bell Dimensions
Technical dimensions for the Flat Bell model.
Topsham Dimensions
Technical dimensions for the Topsham model.
Topsham Tunnel and York Dimensions
Topsham Tunnel Dimensions
Technical dimensions for the Topsham Tunnel model.
York Dimensions
Technical dimensions for the York model.
Kent and Retro Bell Intermediate Dimensions
Kent Dimensions
Technical dimensions for the Kent model.
Retro Bell Intermediate Dimensions
Technical dimensions for the Retro Bell Intermediate model.
Retro Bell Small and View Bell Small Dimensions
Retro Bell Small Dimensions
Technical dimensions for the Retro Bell Small model.
View Bell Small Dimensions
Technical dimensions for the View Bell Small model.
Corner Bell Small and Horizon Bell Medium Dimensions
Corner Bell Small Dimensions
Technical dimensions for the Corner Bell Small model.
Horizon Bell Medium Dimensions
Technical dimensions for the Horizon Bell Medium model.
Horizon Bell Small Dimensions
Horizon Bell Small Dimensions
Technical dimensions for the Horizon Bell Small model.
Horizon Bell Small Tunnel Dimensions
Technical dimensions for the Horizon Bell Small Tunnel model.
Vertical Bell Large Dimensions
Vertical Bell Large Dimensions
Technical dimensions for the Vertical Bell Large model.
Vertical Bell Large Tunnel Dimensions
Technical dimensions for the Vertical Bell Large Tunnel model.
Vertical Bell Small and View Bell Vertical Dimensions
Vertical Bell Small Dimensions
Technical dimensions for the Vertical Bell Small model.
View Bell Vertical Dimensions
Technical dimensions for the View Bell Vertical model.
Operating Unit Dimensions
Operating Unit Dimensions
Provides dimensional information for the operating unit.
Technical Details and Regulations
National Installation Regulations
Covers safety and building regulations for fire installation.
Technical Details: Derby II
Derby II Model Specifications
Specifies country and identification number for Derby II.
Technical Details: Jersey
Jersey Model Specifications
Specifies country and identification number for Jersey.
Technical Details: York, Topsham, Kent, etc.
Gas Rate Maximum Specification
Details the maximum gas consumption rate.
Technical Details: Flat Bell, Retro Bell Intermediate
Supply Pressure Requirements
Specifies the required supply pressure for the appliance.
Technical Details: Retro Bell Small
Burner Pressure (Max) Hot
Maximum burner pressure when hot.
Technical Details: Corner Bell Small
Burner Pressure (Max) Cold
Maximum burner pressure when cold.
Technical Details: Horizon Bell Medium
Minimum Burner Pressure
Minimum burner pressure for operation.
Technical Details: Horizon Bell Small
Gas Regulator Block (Hand Control)
Details of the gas regulator block for hand control.
Technical Details: Vertical Bell Large
Gas Regulator Block (Remote Control)
Details of the gas regulator block for remote control.
Technical Details: Vertical Bell Large Tunnel / Small
Main Burner Specifications
Information on the main burner specifications.
Technical Details: View Bell Vertical
Pilot Light Burner Specifications
Information on the pilot light burner.
Replacement Parts List
Ordering Replacement Parts
Instructions for ordering replacement parts.
Log Set Configurations
Log Set Options by Appliance
Lists available log sets and their components for different appliances.
View Bell Vertical Log Set Details
View Bell Vertical Log Set Details
Details log set configurations and components for View Bell Vertical.
Disposal of Packaging and Appliance
Responsible Disposal Guidelines
Information on how to dispose of packaging materials.
Need help?
Do you have a question about the View Bell Vertical and is the answer not in the manual?
Questions and answers