Related Manuals for Harmonic ProView 7100
Summarization of Contents
Chapter 1 Introduction
1.1 General Information
Provides a high-level overview of the ProView 7000™ receiver.
1.3 ProView 7000™ Platform Main Features and Configurations
Details the core capabilities and available configurations of the platform.
1.5 ProView 7000™ Management
Outlines methods for managing the ProView 7000™ device locally and remotely.
Chapter 2 Quick Start
2.1 Installation and Cable Connection
Covers initial physical setup and necessary cable connections for the device.
2.3 Configuring the IP Parameters
Details the process of setting up network IP configurations for the device.
2.4 Configuring and Monitoring
Explains how to configure and monitor the device via front panel or EMS.
Chapter 3 Front Panel Overview
3.1 Main Elements and Structure
Describes physical components and layout of the ProView 7000™ front panel.
3.2 Front Panel Display
Explains different page types and navigation within the front panel display.
Chapter 4 Device Configuring Using the Front Panel
4.1 Configuring the DVB-S/S2 Input Port Properties
Guides on setting up DVB-S/S2 satellite input port parameters.
4.2 Configuring the Decoding
Details how to configure video and audio decoding parameters.
4.3 Routing and Descrambling
Covers input routing, redundancy, and descrambling parameter configuration.
4.4 Configuring the GbE Ports, Sockets and Routing Table
Explains configuration of Gigabit Ethernet ports and related settings.
4.7 Presets
Explains managing and activating device configurations as presets.
Chapter 5 Monitoring Using the Front Panel
5.1 Device Monitoring
Provides instructions on monitoring the operational status of the ProView 7000™ device.
5.2 Monitoring the DVB-S/S2 Input Port Properties
Details how to check status and reception parameters of DVB-S/S2 input ports.
5.3 Monitoring the Decoding
Monitors decoding channel status and parameters.
Chapter 6 Remote Management using EMS
6.1 Configuring the IP Parameters
Setting up IP parameters for remote management via EMS.
6.3 Installing EMS
Instructions on how to install the EMS application.
6.5 Adding a Device
Describes how to add ProView 7000™ devices to EMS for management.
6.7 Connecting a Device
Procedure to establish a connection between EMS and the ProView 7000™ device.
6.14 EMS Device Explorer
Details on navigating and utilizing the Device Explorer tabs.
Chapter 7 Device Configuring Using EMS
7.1 Physical Input Ports and Slots
Describes physical input interfaces and their properties.
7.2 Multiplex Inputs
Manages multiplexed input streams and their components.
7.3 Multiplex & Decoding Outputs
Configures and manages output streams and decoding channels.
7.6 Cross Connections
Establishes connections between input streams, programs, and outputs.
7.10 Device Management
Covers essential device management tasks like backup, restore, and identification.
7.11 Device Properties
Accessing and modifying various device-level parameters.
Chapter 8 Monitoring using EMS
8.1 Device Communication Status
Interpreting device communication status within the EMS.
8.2 Alarms
Displays and explains active alarms, their severity, and corrective actions.
8.5 DVB-S/S2 Input Port Properties Status
Monitors real-time status of DVB-S/S2 input ports.
8.6 Decoding Channel Properties Status
Checks status of decoding channels, errors, and parameters.
Chapter 9 Contacting Harmonic Support
Harmonic Inc. Contact Information
Provides regional telephone and email contacts for Harmonic support.
Appendix A Characteristics and Specifications
A.1 DVB-S/S2 RF Input Interfaces
Technical specifications for DVB-S/S2 RF inputs.
A.6 Video and Audio Decoding
Technical details on video and audio decoding capabilities.
A.11 Physical and Electrical Characteristics
Device size, weight, power requirements, and rack unit.
Appendix B Connectors and Front End Card Options
B.1 Overview of Rear Panel Ports and Connectors
Illustrates and lists rear panel ports and their connector types.
B.6 Front End Card Features
Lists features and part numbers for front-end demodulator cards.
Appendix F Software Management
F.1 Active Version Management
Managing and selecting active software versions on the device.
F.2 Software Upgrade Manager
Procedure for upgrading device firmware using EMS.
Need help?
Do you have a question about the ProView 7100 and is the answer not in the manual?
Questions and answers