Setting Up Cubase Le For Use With The Omega Studio - Lexicon OMEGA STUDIO Software Installation Manual

C. SETTING UP CUBASE LE FOR USE WITH THE OMEGA STUDIO
1. Take your Lexicon Omega hardware out of the box and plug the power in.
2. Connect the included USB cable to your computer and to the Omega.
3. Open Cubase LE, and go to Devices>Device Setup as shown below.
2. Click on VST Multitrack and select Lexicon Mac USB 1 as the ASIO Driver (as shown below).
3. Cubase LE will now ask you if you would like to switch the driver. Select Switch then OK.
4. Now, go to Devices>VST Inputs. Make each of the 4 Mac USB inputs active by clicking on the
Active buttons and close the box. (If only 2 ports are shown, expand the window to show all 4 ports.)
You are now ready to start recording with Cubase LE.