Installing The Lexicon Usb Drivers - Lexicon OMEGA STUDIO Software Installation Manual

Congratulations on your purchase of the Lexicon Omega Studio. This guide contains the information
needed to install the required USB drivers and Steinberg's Cubase LE recording software for use with
your Lexicon Omega hardware on either Windows
these instructions carefully to ensure smooth installation of each of these components.
OMEGA STUDIO
A. INSTALLING THE LEXICON USB DRIVERS
You must install the USB drivers to use your Lexicon Omega's USB connection with your computer.
Follow the directions listed in the following section to complete the installation process.
1. Start your computer. Close any open programs you have running.
2. Take your Lexicon Omega hardware out of the box and plug the power in.
3. Connect the included USB cable to your computer and to the Omega.
4. You will see multiple messages pop up from the task bar indicating that your computer has found a
new USB device. There will be multiple messages because there are four USB devices in the Omega.
When Windows displays the message "Your new hardware is installed and ready to use", Windows has
completed identifying your new hardware. However, your software installation IS NOT complete.
5. Put the Omega Studio Software Installation disk into your computer's CD-ROM drive. If you have
Autorun enabled, the Omega Driver Installer Setup Wizard will automatically launch. If it does not
launch automatically, you can open it by selecting Start>Run and entering D:\Omega.exe
(where D:\ is the letter of your CD-ROM drive).
6. Next, select the language that you'd like to run the installer in.
7. Continue selecting Next and choose I agree to the terms of the License Agreement.
8. Select the Omega Driver Installer Software components (Cubase LE, Pantheon Reverb Plug-In, and
Help Files) that you wish to install and click Next.
9. Choose your desired installation folder, or use the default setting and select Install.
10. You will now see the window shown below. Click Next to continue and follow the onscreen
instructions for the remainder of the installation.
FOR WINDOWS
™
® ®
XP or Mac OSX computer systems. Please follow
®
XP USERS