Advertisement
Advertisement
Table of Contents
Related Manuals for SpeakerCraft SC2-100
Summarization of Contents
Installation Considerations
Placement
Recommendations for physical placement of the amplifier to ensure proper ventilation and prevent damage.
Turn-On Modes
Instructions on configuring the amplifier's power-on behavior for different system integrations.
Bridged Mode
Instructions for operating the amplifier in bridged mono configuration for higher power output.
Multiple Speaker Loads
Guidance on connecting multiple speaker pairs and impedance matching systems.
Cable and Wire
Recommendations for selecting and using appropriate speaker cables and connectors.
Front and Rear Panel Details
Front Panel Controls and Indicators
Details on the front panel's power switch, mode selector, level adjustment, and status indicators.
Rear Panel Inputs and Outputs
Overview of rear panel audio inputs, cascade outputs, trigger inputs, and control output.
Rear Panel Power and Speaker Connections
Explanation of binding posts, IEC power receptacle, and main power fuse.
Installation
Setting the Turn-On Mode Switch
Instructions on configuring the amplifier's power-on behavior for different system integrations.
Control Output
Explanation of the 12V DC control output for triggering external devices.
Speaker Wire Connections
Detailed guide on how to properly connect speaker wires to the amplifier terminals.
Line Level Audio Input
Instructions for connecting audio sources via line-level inputs to the amplifier.
Cascade Audio Outputs
Information on using cascade outputs to connect additional amplifiers.
AC Power Plug
Procedure for connecting the amplifier to the AC power source.
Operation
Power Switch and LEDs
Explanation of the main power switch functionality and indicator LED meanings.
Cleaning and Maintenance
Guidance on routine cleaning and basic maintenance to ensure optimal performance.
Input Level Adjustment Control
Procedure for adjusting input levels to match system components and protect speakers.
Listening at Higher Volumes
Advice on managing volume levels to prevent clipping distortion and protect equipment.
Need help?
Do you have a question about the SC2-100 and is the answer not in the manual?
Questions and answers