Host Sleep (Mc-12, Mc-1); Get Communication Configuration (Mc-12, Mc-1) - Lexicon MC-12 V3.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-5 Manual

Lexicon, Inc.
MC-12 Serial Communications Protocol

7.3.30 Host Sleep (MC-12, MC-1)

By transmitting the Sleep command, the Host indicates it has just "powered down" and will no longer
respond to MC-12 Notifications. No Acknowledgment is expected. The Host is assumed to be asleep upon
power up of the MC-12. Host status is maintained during standby.
7.3.30.1 Packet Description
7.3.30.2 Data Description

7.3.31 Get Communication Configuration (MC-12, MC-1)

This command is a request to the MC-12 for the current communications configuration for the serial port
and protocol. The MC-12 responds to this command with a Communication Configuration Packet.
7.3.31.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
7.3.31.2 Communication Configuration Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.31.3 Data Description
Data Word Bit
0 0
0 1
Acknowledge Enable:
TRUE Indicates the MC-12 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the MC-12 will not transmit any positive Acknowledge Notification
Parameter Change Enable:
TRUE Indicates the MC-12 will transmit any parameter change Notification as
© 2003 Lexicon, Inc. All rights reserved.
Application Header:
Command HOST_SLEEP
Data Count 0
Application Data:
N/A
N/A
DC_CMD_GET_COM_CONFIG
0
N/A
DC_RESP_COM_CONFIG
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
messages. The MC-12 will always transmit NAK error notification messages.
specified in the Parameter Change Notification Message.
Printed on: 08/18/03
0x12
0x00
0x2F
0x00
0x8C
0x01
nn
31 of 94