Lexicon LXP-15 Owner's Manual page 38

LXP-15 Owner's Manual
Lexicon
Chorus Delay parameters
Delay 1: Delay setting for the first pair of chorus outputs providing up to 794ms
of delay. Also the base delay setting for the Delay 2 and Delay 3. When creating
effects with multiple delay settings, use Delay 1 to set the shortest delay.
Delay 2: The delay setting for the second pair of chorus outputs providing up to
1.04 seconds of additional delay. Note that the total delay setting for this pair of
outputs is the value of Delay 1 added to Delay 2. (The maximum total delay is
1.798 seconds.)
Delay 3: The delay setting for the third pair of chorus outputs providing up to 1.04
seconds of additional delay. Note that the total delay setting for this pair of
outputs is the value of Delay 1 added to Delay 3. (The maximum total delay is
1.798 seconds.)
Feedback 3: Feedback loop around Delay 1 and Delay 3. When set to maximum
( 99%), it continues to add input signal to the loop. Note that feedback in this
algorithm can be either positive or negative. Both produce a more pronounced
chorusing effect, but each produces a different tonal quality for a given set of
delay values.
Treble: Adjusts the high frequency roll-off of the summed stereo outputs of the
three chorus voices.
Diffusion: Adjusts the diffusion of the summed stereo outputs of the three
chorus voices. Higher diffusion settings will soften the attack of percussive
sounds.
Chorus Rate: Adjusts the overall depth and rate of all three chorus voices.
LFO Rate: Adjusts the rate of the internal LFO. Note that in order to hear the
effect of changing the LFO Rate, the LFO must first be patched to control some
parameter in the algorithm. (Check out presets 53-65 for LFO patches)
3-14