Toshiba SG20 - Magnia - Web Server Customization Manual page 41

Customization
newmsg.hidden=0
The hidden field specifies whether the LCD message appears on the configuration
screen. Some messages, such as health monitoring, do not even appear on the user
LCD configuration screen, and are always displayed. To prevent a message from
appearing on the configuration screen, set the hidden field to 1. To present the message
on the user configuration screen, set the hidden field to 0.
newmsg.msgup=-center "Acme App" –center "Running"
newmsg.msgdown=-center "Acme App" –center "Not Running"
newmsg.msgalert=-ontop -center "Acme App" –center "%s Error"
newmsg.msgmail=-ontop -onetime –center "Acme App" –center "Check Mail"
A single LCD message can have several states, or submessages. For example, the
backup message may display the backup status as Not Performed, Started or
Completed. Only one of these messages can be displayed on the LCD panel at a time. If
the Started message is displayed, and then later the Completed message is displayed,
the Completed message replaces the Started message.
In the proceeding example, the Acme App message displays "Acme App" on the first
LCD line. The second line will be Running, Not Running, Error or Check Mail.
The following formatting options are available:
❖
-center: Center the text in the middle of the LCD line.
❖
-ontop: Immediately display this message by placing it on the top of the message
queue.
❖
-onetime: Clear this message from the LCD message queue after it has been viewed
by the user once.
LCD panel customization
41