Table of Contents
Advertisement
Uninterruptible Power Supply
BU75RW/BU100RW/BU200RW/BU300RW
Instruction Manual
• This manual provides important safety-related information. Thoroughly read and understand
this manual before installing and using the product.
• Keep this manual in a convenient location so that you can refer to it whenever necessary.
• The contents of this manual are subject to change without notice.
BU300RW
Advertisement
Table of Contents
Related Manuals for Omron Powli BU100RW
Summarization of Contents
Introduction
Features of this product
Details the protection capabilities of the UPS against power failures and voltage variations.
Notes on the use of the Backup Power Supply
Specifies limitations and recommended uses for the UPS, excluding high-reliability applications.
IMPORTANT SAFETY INSTRUCTION
SYMBOLS AND DEFINITIONS
Explains safety symbols and key terms like internal battery voltage and temperature ratings.
Safety Precautions
General Warnings and Cautions
Covers general safety advice regarding heavy lifting, children, and proper AC input connection.
Installation and Connection Cautions
Details precautions for installation, grounding, and avoiding electrical shock or fire.
Safety Precautions (maintenance & battery replacement)
Maintenance and Battery Replacement Cautions
Advises on safe maintenance practices and specific cautions for battery replacement.
Safety Precautions (Notes)
Moving, Charging, and Storage Notes
Provides guidance on handling the unit after temperature changes and battery charging/storage.
1 Preparation
1-1 Unpacking and Checking Contents
Instructions for unpacking the UPS and verifying all included accessories are present.
2 Installation and connection
2-1 Installation Precautions
Details crucial safety advice before performing installation and connection procedures.
2.Installation and connection
2-5 Checking the operation
Guides on verifying the backup operation and status indicators after installation.
3 Operation
3-1 Operation Precautions
Highlights critical safety measures and warnings for operating the UPS.
3. Operation
3-2 Start and Stop Procedures
Explains the steps for starting, stopping, and basic operation of the UPS.
3.Operation
3-3 Interpreting beeps and displays
Details how to understand the UPS status indicators, beeps, and displays.
4 UPS functions
4-1 Suspending Beeps & 4-2 Self-diagnosis
Describes how to suspend beeps and perform a self-diagnosis test for the UPS.
4. UPS functions
4-3 Auto Battery Test & 4-4 Function Settings
Explains the auto battery test and how to change UPS function settings.
5 Measuring the backup time
5-1 How to measure backup time
Provides a step-by-step guide for measuring the UPS backup time.
5-2 Estimated backup time
Explains how to estimate backup time based on connected device capacity.
6 Maintenance and Inspection
6-1 Checking the battery
Details methods for checking the battery's condition and lifespan.
6. Maintenance and Inspection
6-2 Replacing the battery
Provides instructions for safely replacing the UPS battery.
6. Maintenance and Inspection
6-3 Replacing the fan
Guides on how to replace the unit's fan if it malfunctions.
6. Maintenance and Inspection
6-4 Cleaning
Instructions for cleaning the UPS unit and its receptacles.
7 Using the UPS monitoring software and contact signal
UPS Monitoring Software Overview
Introduces the included UPS monitoring software and its compatibility.
7. Using the UPS monitoring software and contact signal
7-1 Auto Shutdown Setup (Windows)
Guides on setting up auto shutdown using UPS monitoring software for Windows.
7. Using the UPS monitoring software and contact signal
7-2 Auto Save Setup (Windows Server)
Details auto-save functions using UPS service with Windows Server drivers.
7. Using the UPS monitoring software and contact signal
7-3 Auto Save Setup (Windows NT)
Explains auto-save functions using standard UPS service in Windows NT.
7. Using the UPS monitoring software and contact signal
7-4 Contact Signal Overview
Describes the UPS output and input contact signals for system automation.
8 Using an SNMP/Web card
8-1 Adding SNMP/Web Card
Instructions on how to install an SNMP/Web card into the UPS.
9 Extending the backup time
9-1 Connecting an additional battery unit
Guidance on connecting an optional battery unit to extend backup time.
10 Troubleshooting
Troubleshooting Common Problems
Lists common abnormal operations and their corresponding checks and remedies.
References
A. Specifications
Provides detailed technical specifications for the UPS models.
References
B. Dimensions
Illustrates the physical dimensions of the UPS units and mounting accessories.
References
C. Circuit block diagram
Presents the internal circuit diagram of the UPS.
D. Related products
Lists compatible optional products and accessories for the UPS.
Need help?
Do you have a question about the Powli BU100RW and is the answer not in the manual?
Questions and answers