Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Flytec 6010
Summarization of Contents
Operating Philosophy
Run-Mode
Describes the default operating mode and its direct functions.
Set-Mode
Explains entering Set-Mode for function configuration.
Option-Mode
Details accessing advanced settings via Option-Mode.
Switching the Instrument ON / OFF
Switching the Instrument On
How to turn on the instrument and what is displayed.
Startup Screen
Details the information shown immediately after powering on.
Switching the Instrument OFF
Procedure to turn off the instrument.
The Altimeter
How does an altimeter function?
Explains the principles of barometric altimetry.
Altimeter Displays
Lists the three independent altimeters available on the instrument.
Altimeter 1 (ALT1)
Set-Mode ALT1
How to set the absolute altitude and QNH.
Altimeter 2 (ALT2) Absolute / Relative
Set-Mode ALT2 -Relative
How to set a reference altitude for relative mode.
Set-Mode ALT2 -Absolute
How ALT2 functions as an absolute altimeter.
Set-Mode Vario
A-Int = Analog Integrator
Setting the basic damping (turbulence filter) for the variometer.
Option-Mode Vario
Option 1: Unit [Set units]
Setting units for the digital vario display (m/s or ft/min).
Option 2: d-Int [Digital Integrator]
Setting the averaging period for the digital vario.
Option 3: Audio [Audio threshold]
Setting the threshold for the climb tone.
Option 4: Audio Pitch
Adjusting the rate of change for vario beep frequency and pitch.
Option 5: ASI [Acoustic Scale Indication]
Turning acoustic scale indication on or off.
Sink alarm
Set-Mode Sink Alarm
Setting the threshold for the sink alarm.
Option-Mode Temp/Speed
Option 1: Unit Temperature
Setting temperature units to Celsius or Fahrenheit.
Option 2: Corr [Temperature correction]
Correcting temperature sensor readings.
Real-time clock
Set-Mode TIME
Setting the time, year, month, and day.
Option-Mode TIME
Choosing between 12-hour and 24-hour time format.
Barograph Recording [Model 6010]
Recording Start / Stop / Store
How barograph recording begins and requirements for storage.
Time Marker
Inserting markers into barogram data for events.
Set-Mode MEMO [Model 6010]
Clear All Barograms
Procedure to delete all recorded barograms and logbook data.
Delete a Barogram
How to delete the most recent barogram recording.
Battery
Battery condition
How to check the battery status.
Battery change
Procedure for replacing the batteries.
Maintenance and Care
Water Damage
Procedures to follow in case of water damage.
Need help?
Do you have a question about the 6010 and is the answer not in the manual?
Questions and answers