Page 3
Introduction Introduction The Flytec Balloon TT34 is a wireless temperature measurement device specifically developed for the needs of modern hot-air ballooning. It works in conjunction with any Flytec Balloon variometers and transmits the measured envelope temperature to those devices. TheTT34 is designed to use a very low amount of electric power during regular operation. An automatic activation...
Page 4
Batteries Batteries The Flytec Balloon TT34 uses one regular 9V Alkaline battery. In new devices, the battery is already installed. The use of rechargeable batteries is not recommended, since the lower capacity of rechargeables diminishes the operation autonomy of the TT34 considerably.
Page 5
Mounting Mounting Mounting the TT34 temperature transmitter...
Page 6
Pairing For any Flytec Balloon variometer to receive data from a TT34, the two need to be paired. This is done by entering the TT34’s serial number, as marked on the label, into the appropriate field of the variometer. Refer to the variometer’s manual to see how to pair a TT34 with that model.
Page 7
20°C (36°F) above the temperature at the TT34's casing. Manual activation The Flytec Balloon TT34’s data transmission starts whenever a battery is connected to its terminal, and lasts until the condition for automatic deactivation is met (see above).
Page 8
Compliance Compliance FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Balloon TT34 and is the answer not in the manual?
Questions and answers