Update Product Software; Method 1: Auto-Update - LaCie d2 Network 2 User Manual

LaCie d2 Network 2
User Manual

4.17. Update Product Software

LaCie may improve your network hard drive's software or add new
features over time. See below for updating information.
Note that you can always restore your drive to factory defaults by
following the procedure in 4.18. Reset to

4.17.1. Method 1: Auto-Update

Your network hard drive is by default configured to obtain the latest
software updates through the internet. The Support page of your
product's Dashboard will check if updates are available and install
them if you wish.
Alternatively, if you prefer to update your drive manually or are on
a restricted network, you can accomplish this using LaCie Network
Assistant (see 4.17.2. Method 2: Update with LaCie Network As-
sistant Software).
1. Open Dashboard > Support.
2. In the Auto-Update box, click the gray downward-facing arrow
to check for a new update (Fig.
3. If an update is available, the download will begin automatically.
4. Once the download has concluded, click the Install button (Fig.
81).
5. The drive will reboot and will therefore disappear from the net-
work temporarily (Fig. 82). When it reappears, you can verify the
new software version on Dashboard > Support.
• DESIGN BY NEIL POULTON
Factory.
80).
Administering Your LaCie d2 Network 2
Fig. 80
Fig. 81
Fig. 82
page 58