The System Status page displays space usage information and status information about your Iomega StorCenter ix4-200d. It also provides a control panel that

enables you to:

Blink the lights

Restart

Shut down

Space Usage

The Space Usage section graphically represents the amount of space used by Shares on the Iomega StorCenter ix4-200d. The exact space used displays in a

Tooltip when you mouse over each Share.

Control Panel

The Control Panel displays commands for the Iomega StorCenter ix4-200d:

Blink the lights

To help identify a specific Iomega StorCenter ix4-200d when there is more than one device configured on your network, blink the lights on the front of the

Iomega StorCenter ix4-200d by clicking:

Restart

Restart the Iomega StorCenter ix4-200d.

Shut down

Shut down the Iomega StorCenter ix4-200d.

Before shutting down the Iomega StorCenter ix4-200d, be sure you have access to the physical device to turn it on. It is recommended that

you always use the power button to shut down the device.

Device Information

The Device Information section displays various hardware, software, and status details.

Status

The Status Information section displays changes to or issues with your Iomega StorCenter ix4-200d. If an issue requires user action to resolve, such as a

warning or error message, the Iomega StorCenter ix4-200d Console displays a link in the status message.

The following types of messages can display:

INFORMATION

WARNING

ERROR

Iomega StorCenter ix4-200d

Identifies that a change has been m ade to the state of

your Iom ega StorCenter ix4-200d, usually by a user,

such as attaching a peripheral.

Identifies that there is a problem with your Iom ega

StorCenter ix4-200d that requires your attention, but

your device will continue to operate norm ally for now.