When you turn on this protocol, you can enable the Iomega StorCenter ix4-200d as an rsync server. When the Iomega StorCenter ix4-200d is an rsync server,

it can be used as a source and/or destination device for rsync Copy Jobs. Because of the fast and efficient nature of rsync, an rsync Copy Job can be faster

than a Windows File Sharing Copy Job. For more information on Copy Jobs, refer to

If you enable the Iomega StorCenter ix4-200d as an rsync server, you can optionally set up a user account on the Iomega StorCenter ix4-200d for secure rsync

Copy Jobs.

Configuring rsync server settings

1. To enable rsync server, click the switch on.

2. Once turned on, supply a port that the rsync Server uses.

3. To create a secure user account, check Configure secure rsync credentials. The username is preset as rsync. Enter a password and confirm it for the

rsync username. When you create a secure rsync user account on the Iomega StorCenter ix4-200d, you allow other devices to securely copy to or from

it.

4. Click Apply to save your settings.

To change any rsync server settings, click

Copy

Jobs.

Iomega StorCenter ix4-200d

Table of Contents