Groups consist of one or more users, and administrators can grant each group rights to Shares on the Iomega StorCenter ix4-200d. Users can belong to more

than one group. The Groups page enables administrators the ability to create one or more groups, and grant each group rights to Shares on the Iomega

StorCenter ix4-200d. To create a group, enable security first. Administrators can grant individual users access rights to Shares on the Iomega StorCenter ix4-

200d. Refer to

Managing Shares

Refer to the

Security

By default, there are no groups defined. Once an administrator defines one or more groups, the Groups functionality is dynamically available when creating,

modifying, and viewing users, Shares, and groups.

To add users to the group, click

How access rights are granted using groups in Workgroup mode

When groups are defined in Workgroup mode, a user's access rights are the most rights granted to the user and all groups to which the user belongs. For

example, assume 3 Shares exist (SF1, SF2, and SF3), two users (UserA and UserB), and three groups (Group1, Group2, Group3). When created, UserA was

granted no rights to access any Share and UserB was granted Read rights to SF3. Group1 has Read/Write rights to SF1, Group2 has Read/Write rights to SF2,

and Group3 has Read/Write rights to SF3. If UserA is added to Group1, UserB is added to Group2, and Group1 is added to Group3, the table below shows the

resulting access rights for each user and group defined:

Name

UserA

UserB

Group1

Group2

Group3

How do I...

add new groups

add users

delete users

for more details.