HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Firmware Release Notes page 9

Verifying Macintosh Settings. On the Quick Setup
configuration page (see step 4 on page 5), click on the Mac (AFP) tab
and verify the settings; they are the same ones available in the
wizard. See the illustration below. Click [OK] and you will return to
the Quick Setup configuration page. If you have made any changes,
click [Restart Server] to put the changes into effect.
Network Time Protocol. For automatic time synchronization you
can use the Network Time Protocol (NTP, as defined by RFC 1769).
Under the Administration tab, click [This Server] and with the
server module highlighted, click [Settings]. On the resulting
properties page, select the Date & Time tab. Select Automatically
and Network Time Protocol (NTP). Then for NTP Server, specify the
IP address or Internet domain name of the time server. Click [Save].
Server Password. To protect the system files, it is important that
you change the server password for the administrator's web access.
(For example, users are prompted for the server password when
trying to access the Administration or Quick Setup web page for the
first time during a session.) Click on the Administration tab, click
[This Server] and with the server module highlighted, click [Settings].
On the resulting properties page, select the General tab. Change
and confirm the password. Click [Save]. This new password takes
effect without restarting the server.
Latest News: Firmware Version 5.10 9