HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Firmware Release Notes page 6

6 Latest News: Firmware Version 5.10
7. On the TCP/IP Wizard—Manual IP Addresses page, shown below,
beneath the IP address you set in step 8 of the procedure on
page 3, enter the subnet mask for your local network. (0.0.0.0
means that automatic router sensing is used.) Enter the default
router, or gateway. (0.0.0.0 means that no default router is set.)
Click [Next >].
8. On the "TCP/IP Wizard—DNS Parameters" page, if you have a
DNS server, set the domain name and the primary and secondary
DNS servers. Click [Next >].
9. On the next web page, if you are using a WINS server, select
Enable WINS Resolution and supply the WINS server
IP addresses. Click [Next >].
10. On the last page, click Finish.
11. On the main Wizard page, select Macintosh (AFP) and
click [Start >]. You will see the Name page.
12. Enter a server name to be presented to the Macintosh clients on
the network, if you wish to change the server name shown.
Click [Next >].