HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Firmware Release Notes page 8

Optional:
Note
8 Latest News: Firmware Version 5.10
Server Configuration Using Detailed View
On the Quick Setup configuration page (see step 4 on page 5), click
the Detailed View icon. You will see a page with tabs for each
protocol (shown below). These pages allow you to see and change
protocol configuration settings, which include all the settings that
were available to you in the wizard (the previous procedure starting
on page 4). Consider the following configuration items.
Disabling Access for Other Protocols. In the Detailed View
(from the Quick Setup page), you can switch off all protocols not
being used on your network.
You can disable Microsoft networking (SMB) access by using the
Windows (SMB) tab and disabling the NetBIOS Protocol Bindings
for both NetBEUI and TCP/IP. You can disable NetWare access by
using the NetWare tab and the Enable NetWare setting. You can
disable UNIX access to the server by using the UNIX (NFS) tab and
the Enable NFS setting.
Do not disable Web (HTTP) access. Maintain administrative
access to the server using this web interface.
If you should ever need to disable Macintosh access to this server,
use the Mac (AFP) tab and the Enable AFP setting.
Click [OK] and you will return to the Quick Setup configuration
page. If you have made any changes, click [Restart Server] to put
these changes into effect.