HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Firmware Release Notes page 7

13. The network will be scanned for all available zones and they will
be listed for Zone. By default, the server will select the default
zone of the nearest router. To change it, select the preferred zone.
If no router is attached to this segment, you will see "No Zones
Available" for Zone. Click [Next >]. You will see the Protocols
page, shown next.
14. Select the protocol(s) currently being used on your network.
Click [Next >]. You will see the Finish page.
15. Click [Finish]. Click [Close], and you will return to the Quick Setup
configuration page. If you have made any changes, click [Restart
]Server] to put the changes into effect.
This restarts the server with the configuration changes and
returns you to the main Network Settings Wizard page (see
step 5 on page 5). When the Status indicator remains green
and the SCSI indicator is off, the server is ready for use. This
may take a few seconds to five minutes.
Return to the Quick Setup configuration page (see step 4 on
page 5) by clicking [Close].
The next procedure is used for some optional configuration.
Latest News: Firmware Version 5.10 7