HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Firmware Release Notes page 10

Client Access to
Discs
10 Latest News: Firmware Version 5.10
Procedure for Client Access to Discs
1. On a Macintosh, open the Chooser from the Apple menu.
2. Click the AppleShare icon. (See the illustration on page 2.)
• If the AppleTalk and EtherTalk protocols are enabled on
the server and client, then the HP server name should
appear in the Select a file server list. The default server
name is HP hhhhhh _AT, where hhhhhh are the last six digits
of the server's MAC address. However, the server name
may have been changed during configuration. Select the
server and click [OK]. Skip to step 3.
• If the AppleTalk and EtherTalk protocols are not enabled,
and TCP/IP is enabled on both server and client, then the
server name will not appear in the Select a file server list.
In this case, click [Server IP Address...], enter the IP address
assigned to the server, and click [Connect].
3. For client access to files on the server's discs (and not to the root
System configuration files), select Guest and click [Connect].
4. Click one of the discs available. Click [OK].
(The item System is grayed out because only the administrator
has access to the server's system configuration files.)