Users Can
Change Their
Own Passwords
Note
Default
"SetCommunity
Name"
Once the Administrator has configured the User Password for
Users set up with User Level security, the client user is able to
change his own password, without knowing the Administrator
password for the HD Server. (If Passthrough Authentication is
used, the password cannot be changed here but must be changed on
the authentication server.)
Clients can be directed to do this using the following steps:
1. In the web browser, type the server's IP address in the URL.
2. On the server's web page, click the Security tab.
3. Use the resulting Security
change the password.
As long as the Change User button remains selected and you do
not click on the Web UI or Microsoft Networking button, you
will not be prompted for the Administrator password.
Client users also have access to the Identity and Support pages
in the same way.
In the "Reset Defaults" table in chapter 6 of the User's Guide,
the default setting for SetCommunity Name is shown as "Private".
The default is both "Public" and "Private". This allows HP TopTools
to set trap destination entries correctly.
Change User Password page to
Addendum: HP SureStore HD Server 4000 9