HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Addendum page 3

What is Configured
Setup Tasks for Automatically Adding Users
This information about using the Windows security in the updated
firmware amends the documentation found in "Set Up Shares" and
"Set Up Users and Groups", in chapter 4 of the User's Guide.
The following illustration shows what is configured on each device.
On the authentication server (commonly called the domain
controller or PDC) for the domain containing the user accounts:
•
In the User Manager for Domains application, set up the users
and global groups that you will permit to access the HD server,
if they are not already there. You will need to enter the group
names identically on the HD server. Passwords are maintained
here in User Manager.
•
In the Server Manager for Domains application, add the
HD server to the domain. It will appear as an NT 4.2 server.
On the HD server in HD Server Admin:
•
Set the Security Model to User Level (as it is by default) on the





Microsoft Networking page.
Security
•
Enter the name and IP address of the Windows NT domain
controller (authentication server) for Passthrough
Authentication on the Configuration
Microsoft Networking page. When you first add the name and
address, the parameters Automatically add users to user list
and Update user membership in groups automatically are
switched on automatically (the boxes are checked).
However, if you have upgraded to this new firmware and had
previously set Passthrough Authentication (the name and
address are filled in), then you must check the boxes yourself.





Network
Addendum: HP SureStore HD Server 4000 3