HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Addendum page 4

Note
4 Addendum: HP SureStore HD Server 4000
When Update user membership in groups automatically is on,
the authentication can operate as described above. Switching
off this setting enables the user to be added to the user list but
does not add the user to groups, which disables automatically
granting access based on groups.
•
Set up the groups that will have access to shares on the
HD server using [Create] or [Edit] on the





Configuration
defined with identical names on the domain controller. Only
global and not local groups can be used on the HD server (see
page 2).
You need not configure the Users in the groups or
Passthrough Authentication on the User page. These are
automatically configured for you when you set up the





Configuration
described on page 3.
Groups will also be updated each time the user again maps a
drive to the share or selects it from Network Neighborhood
(unless Update user membership in groups automatically is
disabled).
•
Set up any file shares in addition to, or in place of, the default
"pub" share, using the [Add] button on the





Configuration
•
For each of the file shares, including "pub", specify the groups
allowed access to the share and their access rights, using the
[Permissions] button on the Configuration
Remove the default group "Everyone" from the share to
maintain your NT user security.
Other Limitations
A limit of 100 user names and 50 groups can be defined on the
HP SureStore HD Server 4000.
The password that authenticates passthrough users (which is
maintained on the domain controller) cannot be changed using





the Security
Admin. That page can be used only to change passwords that
are specifically configured on the HD server (on page 5 see
"You can set up and maintain the Users and Passwords...").
Users & Groups page. These groups must be





Network Microsoft Networking page as
File Shares page.
Change User Password page in HD Server





File Shares page.