HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Addendum page 10

9-pin "Serial"
Connector for
Future Use Only
Specifications for
HP 9.1-GB SCSI-2
Disk Drive
Module
Class A for
HP J3291A and
DAT40i Tape Drive
Note
10 Addendum: HP SureStore HD Server 4000
Hardware Changes and Notes
The 9-pin connector labeled "Serial" on the rear of the server has no
function at this time. Do not attach anything to it. It is illustrated
in the "Rear View of HD Server" in chapter 2 in the User's Guide.
Corrections for appendix C in the User's Guide:
Latency
Power Consumption
Current
Corrections for appendix C and D are shown in this section.
HP J3291A SureStore HD Server 4000, containing the
HP C5686A SureStore DAT40i DDS-4 internal tape drive,
has some different regulatory specifications—Class A—as shown in
this section.
The other models HP J3290A, J3292A, and J3293A
SureStore HD Server 4000 continue to have the same Class B
regulatory compliance described in the User's Guide. (See their
Declaration of Conformity on page 14 below.)
When you install the HP C5686S SureStore DAT40i DDS-4
Tape Drive into t he other models, the server will then comply
with Class A regulations as shown below.
Electromagnetic Specifications
CISPR 22 Class A
FCC Part 15, Class A
EN 55022 Class-A
EN 55024
Canadian EMC Class A requirements
Average 4.17 millisecond
Average 12.8 W
Average 0.47 A @ 5 V
0.87 A @ 12 V