HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Manual page 23

Client Access to
Discs
Procedure for Client Access to Discs
1. On a Macintosh, open the Chooser from the Apple menu.
2. Click the AppleShare icon. (See the illustration on page 14.)
• If the AppleTalk and EtherTalk protocols are enabled on
the server and client, then the HP server name should
appear in the Select a file server list. The default server
name is HPhhhhhh_AT, where hhhhhh are the last six digits
of the server's MAC address. However, the server name
may have been changed during configuration. Select the
server and click [OK]. Skip to step 3.
• If the AppleTalk and EtherTalk protocols are not enabled,
and TCP/IP is enabled on both server and client, then the
server name will not appear in the Select a file server list.
In this case, click [Server IP Address...], enter the IP address
assigned to the server, and click [Connect].
3. For client access to files on the server's discs (and not to the root
System configuration files), select Guest and click [Connect].
4. Click one of the discs available. Click [OK].
(The item System is grayed out because only the administrator
has access to the server's system configuration files.)
5. An icon for that disc will appear as another share on your desktop.
Latest News: Firmware Version 5.30 23