Related Manuals for Response Alarms SA1
Summarization of Contents
System Security
Safety Precautions
Provides advice on using tools, ladders, and protective equipment.
Kit Contents and System Extension
Kit Contents Overview
Lists all components included in the alarm system kit.
Extending the Alarm System
Describes available accessories to enhance system protection.
External Solar Siren
Solar Siren Positioning
Guides on selecting the best location for the siren for visibility and sound.
Solar Siren Installation
Step-by-step instructions for physically mounting the siren.
Configuring the Solar Siren
Beep Disable Function
How to disable audible acknowledgements from the siren.
Siren Disable Function
How to disable the siren sounding during an alarm.
Jamming Detection Disable
How to enable or disable the jamming detection feature.
Solar Siren Initial Power-Up
Remote Control Unit Overview
Overview of the remote control's functions and features.
Configuring the Remote Control
Instructions for setting the House Code on the remote.
Remote Control and Keypad Operation
Testing the Remote Control
Procedures for testing the remote control's functionality.
Keypad Overview
Overview of the keypad's functions, security, and power.
Keypad Setup and Configuration
Keypad Positioning Guidance
Guidance on selecting an appropriate location for the keypad.
Keypad Installation Steps
Step-by-step instructions for mounting the keypad.
Keypad Configuration Settings
How to set the House Code for the keypad.
Changing Keypad Access Code
Procedure for changing the keypad's user access code.
Keypad and PIR Detector Testing
Testing the Keypad
Steps to test the keypad's arming, disarming, and PA functions.
Passive Infra-Red (PIR) Movement Detectors
Explains how PIR detectors work and their limitations.
PIR Detector Positioning
Recommends placement and height for PIR detectors.
PIR Movement Detector Installation and Configuration
Installing PIR Movement Detectors
Step-by-step instructions for mounting PIR detectors.
Configuring PIR Movement Detectors
Details on setting House Code, walk test, and pulse count.
Magnetic Contact Detector Setup
Magnetic Contact Detector Positioning
Guidance on placing magnetic contacts on doors/windows.
Installing Magnetic Contacts
Step-by-step instructions for installing magnetic contacts.
Magnetic Contact Detector Configuration and Testing
Configuring Magnetic Contacts
Instructions for setting House Code and other DIP switches.
Testing Magnetic Contacts
How to test the magnetic contact detectors.
System Testing and Operation
System Testing Procedures
Procedures for initial and installed system testing.
Initial Device Testing
Recommends testing each device as it's installed.
Installed System Verification
Steps to verify the entire system functions correctly.
Operating Instructions Overview
Information on system modes and arming/disarming.
System Service Mode Activation
How to put the system into Service Mode for maintenance.
Arming and Disarming the System
Arming the System (Instant Mode)
How to arm the system immediately using remote or keypad.
Arming the System (Delay Mode)
How to arm the system with an entry/exit delay.
Disarming the System
How to disarm the system using the remote or keypad.
System Features and Maintenance
Personal Attack (PA) Alarm
How to activate the Personal Attack alarm.
Battery Monitoring
How the system indicates low battery status for components.
Solar Siren Maintenance
Cleaning the solar panel for optimal charging.
Batteries and Alarm Record
Replacement Batteries and Disposal
Specifications for replacement batteries and disposal advice.
Alarm Record Keeping
Section to record User Access Codes and System House Code.
Troubleshooting Common Issues
Siren Fault Diagnosis
Addresses false alarms and no response from the siren.
Detector Communication Problems
Diagnoses issues with detectors not responding or communicating.
Further Troubleshooting and Notices
Magnetic Contact Detector Faults
Addresses magnetic contact detector issues and false alarms.
LED Indicators and Post-Installation Notices
Explains LED meanings and important post-installation steps.
Extending Your Alarm System
SU1 - Accessory Set Details
Describes the SU1 accessory set contents.
SU2 - PIR Detectors (Twin Pack)
Describes the SU2 accessory kit for PIR detectors.
SU3 - Remote Controls (Twin Pack)
Describes the SU3 accessory kit for remote controls.
Component Specifications
External Solar Siren Specs
Technical specifications for the external solar siren.
Keypad & Remote Control Specs
Technical specs for the keypad and remote control units.
Detector Specifications
Technical specs for PIR and magnetic contact detectors.
Need help?
Do you have a question about the SA1 and is the answer not in the manual?
Questions and answers