Disconnecting The Ipod; Recording; Recording On An External Device - Denon RCD-CX1 Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
ON/STANDBY
ON STANDBY
[MENU/SET]
[2/u]
[8/i]
[TIME/DISPLAY]

Browse mode
Operating mode that shows iPod information on the RCD-CX1
display.
BUTTON
In this mode, it is not possible to operate the iPod directly or to
<BUTTON>
perform the operations associated with the slide show function. Set
[BUTTON]
the Remote mode to play slide shows.
Remote mode
<SOURCE>
This mode is for operating the iPod directly while watching the
information displayed on the iPod's screen.
Also see the control dock for iPod operating manual regarding
connection and operation.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
To Switch the Display
During playback, press
The display switches each time the button is pressed.
Title name
[5/ENTER]

Disconnecting the iPod

1
ON/STANDBY
Press
2
Remove the iPod from the control dock for iPod.
[TIME/DISPLAY]
.
Album title Artist name
Elapsed time of
currently playing track
to set the standby mode.

Recording

Recording on an External Device

First connect the device from which you want to record to the
RCD-CX1 (vpage 9).
1
<SOURCE>
Press to choose the input source to be
recorded.
2
Set the recorder to the recording mode.
b For instructions on operating, see the operating instructions of the
connected component.
3
Start playback on the player.
b For instructions on operating, see the operating instructions of the
connected component.
• The LINE2 input signal is not output to the recording output terminal
(REC).
• Adjusting the volume or tone does not affect the sound being
recorded.