Specifications - Lexicon I-ONIX U42S Owner's Manual

Specifications

Microphone Inputs:
Input Impedance:
Phantom Power:
Maximum gain:
E.I.N. (at max gain):
Maximum Input Level:
Frequency Response:
THD+N:
Line Inputs:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Instrument Input:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Line Outputs:
Level:
Impedance:
Headphone Output:
MIDI Interface:
Sample Rate:
Dynamic Range:
Power Requirements:
Lexicon engineers are constantly working to improve the quality of our products. Specifications are
®
therefore subject to change without notice.
Female XLR Pin 2 Hot
3kΩ balanced
+48 Volts
+58 dB
−126 dBu @ 58dB gain typical (150Ω source)
−129 dBu @ 58dB gain typical A-weighted (150Ω source)
+14 dBu at minimum gain
+0/−1 dB, 20Hz - 20kHz
<0.02%, 20Hz - 20kHz (mic input to main output)
<0.015%, 1kHz, -6 dBu input level
1/4" TRS balanced or unbalanced
20kΩ balanced, 13kΩ unbalanced
+32 dBu
+0/−1.5 dB, 20Hz - 20kHz (reference 1kHz)
<0.05%, 20Hz - 20kHz (line input to main output)
1/4" TS unbalanced
1MΩ
+13 dBu
+0/−2 dB, 20Hz - 20kHz (instrument input to main output)
<0.05%, 20Hz - 20kHz, +4 dBu
1/4" TRS balanced or unbalanced
>+18 dBu maximum
32Ω Balanced, 16Ω Unbalanced
1/4" stereo jack 350mW per channel at 50Ω
5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
44.1, 48, 88.2, or 96 kHz (determined by computer application)
A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
18W 9VAC
Power adaptors available for:
PSS3-120 (USA)
PSS3-EU (Europe)
PSS3-UK (United Kingdom)
PSS3-JA (Japan)
PSS3-AU (Australia)
23