Lexicon I-ONIX U42S Owner's Manual page 11

Hide thumbs Also See for I-ONIX U42S:
Table of Contents

Advertisement

13. MIc/LIne 4 GaIn KnOB
Adjusts the input gain level for Mic/Line 4.
14. OutPut LeveL KnOB
Controls the Left and Right Main output level.
15. S/PDIf LeD
Lights when a S/PDIF connection is detected. Note that a connection to S/
PDIF can only be made when a USB connection is established.
16. MOnItOr MIx KnOB
The I•ONIX U42S unit gives you the ability to hear your analog input sig-
nals directly and immediately while recording without having to adjust levels
in software and before the delay caused by digital converters and computer
recording latency. This zero-latency analog monitoring is controlled by the
Monitor Mix knob, which you can use to adjust the blend between the
live analog inputs (called "Direct") and any sounds coming back from the
computer via USB ("Playback"). To hear only the live source input signals
plugged into the U42S, turn the Mix knob fully left to Direct. To hear only
the mix from the computer, turn the Mix knob fully right to Playback. The
output from the Monitor Mix control is routed to the Main outputs and
Headphone outputs.
17. uSB LeD
Lights when a USB connection is detected.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-onix u22

Table of Contents