The I-Onix Fw810S Mixer - Overview; Installation - Lexicon I-ONIX FW810S Owner's Manual

the I-OnIX fw810S Mixer - Overview

The I-ONIX FW810S includes a powerful hardware Mixer with a soft-
ware control panel and built-in EQ, dynamics, and monitor reverbs. When
open, the Mixer controls the I-ONIX FW810S hardware. The controls are
described in more detail on the following pages, and a step-by-step example
project can be found in the FW810S Tutorial.pdf file located on the DVD.
To turn a knob in the mixer, click and hold on a knob and move the cursor
up to increase or down to decrease the parameter's value. To move a fader,
click and hold on the fader and move the cursor up or down to move the
fader up or down.
To return a knob to its default position, double click the knob. Ctrl-click to
fine adjust.

Installation

1. Insert the DVD into your DVD-ROM drive.
2. The Installer should start automatically. Follow the on-screen instruc-
tions to install the software you wish to use. The Mixer is included
with the Drivers and Control Software.
Note: You must install the I-ONIX FW810S Drivers and Control
Software to use the FW810S.
If the Installer doesn't start automatically, you can start it manually by open-
ing the approprate file on the DVD:
For Mac: Open Me
For Windows: InstallationMenu.exe
9