Introduction; Features - Lexicon I-ONIX FW810S Owner's Manual

Hide thumbs Also See for I-ONIX FW810S:
Table of Contents

Advertisement

Introduction

Congratulations and thank you for purchasing the Lexicon
FW810S!
With a wealth of features – including dbx
pre's, Pantheon II reverbs, and a powerful hardware mixing board with dbx
dynamics and hardware monitor reverb – the Lexicon I•ONIX FW810S is
more than just an 10-in, 12-out FireWire
ing studio contained in a single rack unit.
The high-voltage, ultra low noise dbx mic pre's on every channel pro-
vide optimal timbre and tonality on every track. And the newly updated
Pantheon II plug-in provides smooth, lush Lexicon reverbs for creating ideal
sonic spaces.
With built-in dbx Type IV
serve their dynamic range even when levels get too high. They'll acquire that
forgiving, oversaturated quality once only found on big analog recorders.
conversion actually gives you more headroom, capturing subtle details in
higher level signals instead of hard clipping them.
Plus, the Lexicon I•ONIX FW810S adds a powerful hardware Mixer with
integrated dbx dynamics (compresser, gate, limiter, EQ) to your digital audio
workstation. The Mixer's true-to-life interface design feels familiar from the
second you start it, making it easy to adjust levels, route signals through 10
inputs and 12 outputs, and apply and preview reverbs and dynamics. And
the I•ONIX FW810S does the processing, so you can mix and fine tune
your recordings in real time with zero latency. You can even save and load
snapshots of mixer settings. Create up to five unique monitor mixes or mix
7.1 surround projects. Or assign the I•ONIX FW810S to start up with a
snapshot.
With so many powerful and useful recording studio tools, it's more than just
a FireWire interface. It's the Lexicon I•ONIX FW810S.

Features

dbx high-voltage, ultra low noise mic pre's on all 8 channels
dbx dynamics (compressor, limiter, gate, EQ) on all 8 channels
6 analog combi-jack inputs on the rear panel for mic/line inputs
2 front panel combi-jacks accept mic, line, or instrument signals
Type IV conversion feature emulates tape saturation at high levels
Zero latency hardware mixer with dbx dynamics and hardware monitor
reverb
44.1 to 96KHz sample rates, 24 bit processing
8 analog TRS outputs (7.1 surround capable) and stereo main (control
room) outs
®
high-voltage, ultra low noise mic
TM
audio interface. It's a pro record-
conversion, your digital recordings will pre-
TM
®
I-ONIX
1

Advertisement

Table of Contents
loading

Table of Contents