Lexicon 960L V2.5 - INSTALLATION AND RELEASE NOTES REV Installation Instructions Manual page 7

960L Version 2.5 Software
Note:
Setting the input level above –6dB can result in DSP overflows.
• When processing audio, loading a very small Random Hall program while running a large
Random Hall program (i.e. loading Oil Drum while running Large Hall) may generate DSP
feedback. The level and duration of the feedback depends on the audio source. To prevent
feedback from occurring, mute the machine before loading the smaller Random Hall
program.
• Occasionally, LARC2 motorized faders may exhibit a "vibrating" characteristic when settling
into a new position as programs are loaded. The characteristic may appear to be inconsistent
from fader to fader. This is normal due to the varying characteristics of individual fader
components. The faders will settle into a stable position after a short adjustment or
calibration period.
• Input/output routings need to be set after installing Version 2.5. Once set, the input/output
routings are saved with the configuration and will be automatically recalled when that DSP
configuration is loaded.
• Input/output routings saved with each configuration may become invalid if the order of the
input/output cards is changed or if an input/output card is removed from the unit. If this
occurs, simply reset the input/output routings.
• Manual fader adjustment may be prevented when the fader is automatically positioned near
the top or bottom of its physical range, even if the parameter is not set to its maximum or
minimum value. To overcome this anomaly, move the fader in the opposite direction, then to
the desired value.
• The LtRt outputs of the five-output configurations cannot be routed as inputs to the second
optional reverb DSP card.
• The two machine outputs in the five-channel cascades are mixed to allow processed material
from the first machine to simultaneously pass directly to the system output and feed the
second machine. Phasing and comb filtering will occur if dry signal is passed through both
machines.
Installation Instructions & Release Notes
7