Lexicon 960L V2.4 - INSTALLATION AND RELEASE NOTES REV 3 Installation Instructions Manual page 7

960L Version 2.4 Software
• Manual fader adjustment may be prevented when the fader is automatically positioned near
the top or bottom of its physical range, even if the parameter is not set to its maximum or
minimum value. To overcome this anomaly, move the fader in the opposite direction, then to
the desired value.
• The LtRt outputs of the five-output configurations cannot be routed as inputs to the
second optional reverb DSP card.
• The two machine outputs in the five-channel cascades are mixed to allow processed material
from the first machine to simultaneously pass directly to the system output and feed the
second machine. Phasing and comb filtering will occur if dry signal is passed through both
machines.
Installation Instructions & Release Notes
7