Memory Only Mode - Yaesu VR-160 Operating Manual

M M
EMORY
cursor, then re-enter the correct letter, number, or symbol.
10. When you have completed the changes of the label, press and
hold in the [ BANK ] key for one second to save the label and
exit.
Once memory channel programming has been completed, you may place the radio in a
"Memory Only" mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events, where a number of operators may be using the radio
for first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode, turn the radio off. Now press and hold in
the [ V/M ] key while turning the radio on. To return to normal operation, repeat the above
power-on procedure.
40
ODE R
M B
M
M C
O
O M
VR-160 O
O
M