Download
Share
Print this page
Yaesu VR-5000 Operating Manual
  1. Manuals
  2. Brands
  3. Yaesu Manuals
  4. Receiver
  5. VR-5000
  6. Operating manual

Yaesu VR-5000 Operating Manual

Hide thumbs Also See for VR-5000:

Advertisement

Quick Links

Download this manual See also: Operating Manual
(1) MAIN VOL/SQL Knob
MAIN VOL Knob
The inner MAIN VOL knob adjusts the audio volume of the MAIN receiver in the
speaker or headphones.
SQL Knob
The outer SQL knob sets the signal level threshold at which MAIN receiver audio is
muted (and the "BUSY" icon in the LCD turns off), in all mode. This is normally
kept fully counter clockwise, except when scanning and during FM operation.
(2) SUB VOL/TONE Knob
SUB VOL Knob
This inner SUB VOL knob adjusts the audio volume of the SUB receiver in the
speaker or headphones.
TONE Knob
The outer TONE knob adjusts receiver audio characteristics.
(3) PHONES Jack
This 3-pin ("stereo") miniature jack is used for connection to your headphones.
When a plug is inserted into this jack, the internal (or external) speaker will be cut
off.
This jack's impedance is optimized for use with 16Ω to 32 Ω headphone type.
(4) PWR Knob
This is a main on/off switch for the VR-5000. Press and hold this switch for one
second to toggle the receiver's power on and off.
(5) LCD (Liquid Crystal Display)
The upper half of the display consists of dot-matrix display for frequency readout
and various icons representing enabled receiver features.
The lower half contains a dot-matrix display for Band Scope viewing, menu
programming, and alpha numeric name display etc.
(6) Functions Keys
[M/S(SUB SET)] Key
Press this key momentarily, to toggle the operating VFO between MAIN VFO and
Front Panel Controls & Switches
1
VR-5000
Operating Manual

Advertisement

loading

Related Manuals for Yaesu VR-5000

Summary of Contents for Yaesu VR-5000

  • Page 1 This jack’s impedance is optimized for use with 16Ω to 32 Ω headphone type. (4) PWR Knob This is a main on/off switch for the VR-5000. Press and hold this switch for one second to toggle the receiver’s power on and off.
  • Page 2 VR-5000 Operating Manual SUB VFO. Press this key after [F] key is pressed, to toggle the VFO link feature on and off. [BS(BS SET)] Key Press this key momentarily, to toggle the Band Scope feature on and off. Press this key after [F] key is pressed when the Band Scope is activated, activate the SUB VFO cursor which enable the SUB VFO tuning.
  • Page 3 Channel Marker. (10) Keypad This keypad is used for direct frequency entry during VFO operation. Secondary functions allow to control the VR-5000’s various features. (11) [F] Key This key is used to activate the “Alternate” command functions of the panel keys.
  • Page 4 VR-5000 Operating Manual Unit. (13) DIAL Knob This is the main tuning dial for the VR-5000. It is used for most tuning memory selection, and function setting tasks on the VR-5000. Rear Panel Connections (1) DC 13.5V Jack This is the DC power supply connection for the VR-5000. Connect the Supplied PA- 4A AC adapter to this jack.
  • Page 5 VFO during dual reception. The VR-5000 squelch system allows you to mute the receiver’s audio output when no signals are being received. To set the squelch, turn the SQL knob fully counter clockwise, then turn it clockwise just past the point where the background noise is silenced.
  • Page 6 Operating Manual Rotating the DIAL knob allows tuning in the pre-programmed steps established for the current receiving band. Clockwise rotation of the DIAL knob causes the VR-5000 to be turned toward a higher frequency, while counter clockwise rotation will lower the receiving frequency.
  • Page 7 USB …… Dual Receive The VR-5000 provides the two VFOs (MAIN VFO and SUB VFO) which operate the Dual Receive feature. However, the SUB VFO set only ±20 MHz bandwidth of the MAIN VFO frequency. For example: The MAIN VFO is set to 1280.000 MHz, the SUB VFO can be set to 1260.000 ~ 1300.000 MHz.
  • Page 8 VR-5000 Operating Manual Receiving the World Broadcast Stations Press the [F] key momentarily, then press the [4(SPL)] key. Rotate the DIAL knob to select the cursor to the “STATION CALL” menu, then press the [ENT] key to recall the representation World Broadcast Station (refer to the following list).
  • Page 9 R-AUSTRA Radio Australia 5.995/9.680/12.080/15.415 Memory Operation The VR-5000 provides a wide variety of memory system resources. These include: r 2000 main memory channels into 100 memory groups. r 50 sets of band-edge memories also known as “Programmable Memory Scan” channels.
  • Page 10 Once you have recalled a particular memory channel, you may easily tune off that channel, as through you were in the “VFO” mode. With the VR-5000 in the “ MR” (Memory Recall) mode, select the desired memory channel. Press the [BS(BS SET)MT] key momentarily.
  • Page 11 VR-5000 Operating Manual entered rule described below. When you have made your selection, rotate the DIAL knob clockwise one click to move to the next character. Repeat the previous step to program the remaining letters, numbers, or symbols of the desired label. A total of 74 characters may be used in the creation of label.
  • Page 12 VR-5000 Operating Manual r Press the [υ(π)] key to move the cursor to the right. r Press the [CLR(PRI CLR)] key to cancel the creation of the label. r Press the [CLR(PRI CLR)] key after [F] key is pressed, to cancel the all characters.
  • Page 13 You can use the VR-5000’s powerful microprocessor system to search for Memory Channels according to their alpha-numeric label. In the example below, we shall set up the VR-5000 to find all channels programmed with “POLICE” as an alpha-numeric label (e.g. POLICE 1, POLICE 2, etc.).
  • Page 14 Rotate the DIAL knob to exit the PS memory Channel and return to VFO mode. Scanning The VR-5000 allows you to scan just memory channels, the entire operating band, or a portion of that band. It will halt on signals encountered, so you can hear the station(s) on that frequency, if you like.
  • Page 15 VR-5000 Operating Manual Setting the Scan-Stop Technique Three options for the Scan-Stop mode are available: NORMAL: In this mode, the scanner will stop on a signal it encounters. TONE: In this mode, the scanner will stop when the radio detects the correct CTCSS tone.
  • Page 16 To reverse the direction of the scan (i.e. toward a lower frequency, instead of a higher frequency), turn the DIAL knob one click in the counter-clock direction or press the [τ(θ)] key momentarily while the VR-5000 is scanning. To revert to scanning toward a higher frequency once more, rotate the DIAL knob one click clockwise or press the [υ(π)] key momentarily.
  • Page 17 To reverse the direction of the scan (i.e. toward a lower frequency, instead of a higher frequency), turn the DIAL knob one click in the counter-clock direction or press the [τ(θ)] key momentarily while the VR-5000 is scanning. To revert to scanning toward a higher frequency once more, rotate the DIAL knob one click clockwise or press the [υ(π)] key momentarily.
  • Page 18 To reverse the direction of the scan (i.e. toward a lower frequency, instead of a higher frequency), turn the DIAL knob one click in the counter-clock direction or press the [τ(θ)] key momentarily while the VR-5000 is scanning. To revert to scanning toward a higher frequency once more, rotate the DIAL knob one click clockwise or press the [υ(π)] key momentarily.
  • Page 19 A convenient “Channel marker” can be used to zero in on one of the stations displayed; when you turn off the Band Scope, the VR-5000 will be set to the frequency set by the Channel Marker.
  • Page 20 VR-5000 Operating Manual To activate the Band Scope Set the radio to the VFO mode by pressing the [V/M(MW)] key, if necessary. Press the [BS(BS SET)] key momentarily to activate the Band Scope. When the Band Scope is activated, rotate the DIAL knob or press the [τ(θ)/υ(π)] keys to move the Channel Marker.
  • Page 21 Press the [F] key momentarily, then press the [5(PRI)] key to initiate the Priority. To disable the priority, repeat the above step. The VR-5000 can be changes the checking time (five seconds) among. To do this: Press the [F] key momentarily, then press the [ENT(SET)] key.
  • Page 22 Confirm that the cursor is on the “WRITE” menu, then press the [ENT(SET)] key. World Clock The VR-5000 has a World Clock on the 66 areas. Press the [F]key momentarily, then press the press the [4(SPL)] key. Confirm that the cursor is on the “WORLD TIME” menu, then press the [ENT(SET)] key.
  • Page 23 VR-5000 Operating Manual numeric “label” using the DIAL knob and keypad, as described previously; otherwise press the [CLR(PRI CLR)] key. Rotate the DIAL knob to select the cursor to the “WRITE” menu, then press the [ENT(SET)] key. Operation: Press the [F] key momentarily then press the [9(TIMER)] key.
  • Page 24 VR-5000 Operating Manual the [ENT(SET)] key. Enter the time you want the radio turn on using the keypad, as descried previously, then press the [ENT(SET)] key. Rotate the DIAL knob to select the cursor to the “END” menu, then press the [ENT(SET)] key.
  • Page 25 Keypad Locking In order to prevent accidental frequency change, the VR-5000’s keys and switches may be locked out. To lock out the keys and switches, press the [F] key momentarily, then press the [2(LOCK)] key.
  • Page 26 VR-5000 Operating Manual To disable the keypad beeper, press the [F] key momentarily, then press the [•(BEEP)] key. If you wish to re-enable the keypad beeper, press the [F] key momentarily, then press the [•(BEEP)] key.