Yaesu FT-270R Operating Manual page 26

R
EPEATER
9. If you need to modify the VFO-B (transmit) frequency (for Doppler Shift correction,
etc.), just press the [ VFO ( PRI )] key, then make the necessary change, then press
[ VFO ( PRI )] key once more to restore VFO-A to the "receive VFO" position.
10. When you have finished with Split operation, re-enter the Set mode, and change Set
Mode Item 50:
A split frequency pair set up via the VFO Split feature cannot be stored directly into
memory. You can, however, store odd frequency pairs using a different (slightly simpler)
procedure. See page 29.
22
O
PERATION
VFO S
VFO.SPL VSP.OFF
to "
M
."
FT-270R O M