Yaesu FT-270R Operating Manual page 73

S M I F
21 [ EMG S ]
Selects the alarm(s) utilized when the Emergency function is
engaged.
22 [ I NET ]
Selects the Internet Link Connection mode.
23 [ INT CD ]
Selects the Access Number (DTMF digit) for WiRES™
operation.
24 [ INT MR ]
Selects the memory register for an Access Number (DTMF
code) for non-WiRES™
25 [ LAMP ]
Selects the LCD/Keypad Lamp mode.
26 [ LOCK ]
Selects the Control Locking lockout combination.
27 [ M/T-CL ]
Selects the MONI switch function.
28 [ NAME ]
Toggles the display indication between "frequency" and the
channel's "Alpha/Numeric Tag."
29 [ NM WRT ]
Stores Alpha-Numeric "Tags" for the Memory channels.
30 [ PSWD ]
Enables/disables the Password feature.
31 [ PSWD W ]
Stores the password.
32 [ RESUME ]
Selects the Scan Resume mode.
33 [ REV/HM ] Selects the function of the [ HM/RV ] key.
34 [ RF SQL ]
Adjusts the RF Squelch threshold level.
35 [ RPT.MOD ]
Sets the Repeater Shift Direction.
36 [ PRI.RVT ]
Enables/disables the Priority Revert feature.
37 [ RXSAVE ]
Selects the Receive-mode Battery Saver interval ("sleep" ratio)
38 [ S SRCH ]
Selects the Smart Search Sweep mode.
39 [ SCN MD ]
Selects the Memory Scan channel-selection mode.
40 [ SCN.LMP ]
Enables/Disables the Scan lamp while paused.
41 [ SHIFT ]
Sets the magnitude of the repeater Shift.
42 [ SKIP ]
Selects the Memory Scan "Skip" channel-selection mode.
43 [ SPLIT ]
Enables/Disables split CTCSS/DCS coding.
44 [ SQL.TYP ]
Selects the Tone Encoder and/or Decoder mode.
45 [ STEP ]
Setting of the synthesizer steps.
46 [ TN FRQ ]
Setting of the CTCSS Tone Frequency.
47 [ TOT ]
Setting of the TOT time.
48 [ TX.LED ]
Enables/Disables the TX LED while the radio is transmitting.
49 [ TXSAVE ]
Enables/Disables the Transmitter Battery Saver.
50 [ VFO.SPL ]
Enables or disables "VFO Split" operation.
51 [ WID.NAR ]
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
52 [ WX ALT ]
Enables/Disables the Weather Alert Scan feature.
The following Set Mode Items will appears when the optional FTD-7 DTMF Paging Unit is installed.
S M I F
53 [ ANI ]
Enables/Disables the ANI function.
54 [ ANI.WRT ]
Program the ANI Identifier.
55 [ PAGER ]
Enables/Disables the ANI function.
56 [ PAG.COD ]
Setting the Pager Code for the DTMF Pager.
57 [ PAG.ABK ]
Enables/Disables the Answer Back function of the DTMF Pager.
FT-270R O M
S M
ET ENU
A
( D
EMG.BEP / EMG.LMP /
EMG.B+L / EMG.CWT /
EMG.C+B / EMG.C+L /
EMG.ALL / OFF
INT.OFF / INT.COD / INT.MEM
CODE 0 - CODE 9,
CODE A - CODE F (CODE 1)
d1 - d9
KEY / CONT / OFF
LK KEY / LKDIAL / LK K+D /
LK PTT / LK P+K /
LK P+D / LK ALL
MONI / T-CALL
FREQ / ALPHA
PWD.OFF / PWD. ON
BUSY / HOLD / TIME
REV / HOME
S-1 / S-2 / S-3 / S-4 / S-5 /
S-6 / S-8 / S-FULL / OFF
RPT.OFF / RPT. – / RPT. +
RVT.OFF / RVT. ON
200 MS / 300 MS /500 MS /
1 SEC / 2 SSEC / OFF
SINGLE / CONT
ONLY / MEM
ON / OFF
0.00 - 99.95 MHz ( 0.60 MHz )
OFF / SKIP / ONLY
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS / ECS
5 / 10 / 12.5 / 15 / 20 / 25 / 50
/ 100 kHz, or AUTO
50 CTCSS tones (100 Hz)
1MIN - 30MIN or OFF (6 MIN)
LED. ON / LED.OFF
SAV.OFF / SAV. ON
VSP.OFF / VSP.ON
WIDE / NARROW
ALT.OFF / ALT. ON
A
( D
ANI.OFF/ANI. ON
PAG.OFF/PAG. ON
000 - 999
ABK. OFF/ABK. ON
M
ODE
V
)
: B I
---
---
V
)
: B I
---
69