Yaesu FT-270R Operating Manual page 74

S M
ET ENU
R S
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the repeater Shift.
CTCSS/DSC/DTMF/EPCS S
Selects the number of CTCSS/DCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables "Inverted" DCS code decoding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Programming of the DTMF Autodialer.
Setting the Receiver Pager Code for the Enhanced CTCSS
Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
ARTS S
Selects the Beep option during ARTS operation.
Selects the Polling Interval during ARTS operation.
Enables/disables the CW identifier during ARTS operation.
Programs and activates the CW Identifier (used during ARTS
operation).
M S
Toggles the display indication between "frequency" and the
channel's "Alpha/Numeric Tag."
Stores Alpha-Numeric "Tags" for the Memory channels.
S S
Selects the Scan Resume mode.
Enables/disables the Priority Revert feature.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Selects the Memory Scan "Skip" channel-selection mode.
Enables/Disables the Weather Alert Scan feature.
P S S
Selects the Receive-mode Battery Saver interval ("sleep"
ratio).
Enables/Disables the Transmitter Battery Saver.
W RES™ S
Selects the Internet Link Connection mode.
Selects the Access Number (DTMF digit) for WiRES™
operation.
Selects the memory register for an Access Number (DTMF
digit) for non-WiRES™.
70
M
ODE
S M I A
4 [ ARS ]
ARS. ON / ARS.OFF
35 [ RPT.MOD ] RPT.OFF / RPT. – / RPT. + ( )
41 [ SHIFT ]
0.00 - 99.95 MHz ( )
S M I A
7 [ BELL ]
OFF / 1T / 3T / 5T / 8T / CONT
13 [ DCS.COD ]
104 standard DCS codes ( 023 )
14 [ DCS.N/R ]
T/RX N, RX R, TX R, T/RX R
15 [ DT DLY ]
50MS / 100MS / 250MS / 450MS /
750MS / 1000MS
16 [ DT SPD ]
50MS /100MS
17 [ DT WRT ] –
18 [ ECS.CDR ] ( R05 _ 47 )
19 [ ECS.CDT ] ( T05 _ 47 )
43 [ SPLIT ]
SPL.OFF / SPL. ON
44 [ SQL.TYP ]
OFF / TONE / TSQL /
REV TN / DCS
46 [ TN FRQ ]
50 standard CTCSS tones ( 100 Hz )
S M I A
2 [ AR BEP ]
INRANG / ALWAYS / OFF
3 [ AR INT ]
25 SEC / 15 SEC
10 [ CWID ]
TX OFF / TX ON
11 [ CW WRT ] –
S M I A
28 [ NAME ]
FREQ / ALPHA
29 [ NM WRT ] –
S M I A
32 [ RESUME ]
BUSY / HOLD / TIME
36 [ PRI.RVT ]
RVT.OFF / RVT. ON
39 [ SCN MD ]
ONLY / MEM
40 [ SCN.LMP ]
ON / OFF
42 [ SKIP ]
OFF / SKIP / ONLY
52 [ WX ALT ]
ALT.OFF / ALT. ON
S M I A
37 [ RXSAVE ]
200 MS / 300 MS / 500 MS /
1 S / 2 S / OFF
49 [ TXSAVE ]
SAV.OFF / SAV. ON
S M I A
22 [ I NET ]
INT.OFF / INT.COD / INT.MEM
23 [ INT CD ]
CODE 0 - CODE 9,
CODE A - CODE F, ( CODE 1 )
24 [ INT MR ]
d1 - d9
FT-270R O
V
V
V
V
V
V
V
M